Wheel Loader 50xc

Engine Model WD615 67G3-36A D6114ZGB Type Water-cooled, I-arrangement, direct injection, turbocharger, 4stroke diesel engine Number of cylinder 6 6 Bore’s stroke 126 X 130mm 114 X 135mm Displacement 9.726L 8.27L Rated power 158KW(220hp) 155KW(210hp) Rated turn speed 2200r/min 2200r/min Max. torque 855N.m 850N.m Fuel consumption 220g/Kw.h 222g/Kw.h Starting motor 7.5KW 7.5KW Alternator 0.75KW 7KW Governor Centrifugal, all speed governor Cooling system Forced circulation by centrifugal pumo, pusher type fan Drivingsystem Torque converter Type Single-stage three elements Torque ratio 2.55 Transmission Type Counter shaft-type power shift, semi-automatic Pressure of transmission 1.6~1.8Mpa Driving axle Major speed reducer Type Spiral bevel,1-stage reduction Speed ratio 4.625 Speed reduction on wheel Type 1-stage planetary reduction Speed ratio 4.875 Speed(km/h) Gear 1 Gear2 Gear3 Gear4 Forward 0-6.8 0-12 0-24 0-38 Reverse 0-6.8 0-12 0-24 Steering Type Articulated frame, full hydraulic power with flow amplifiedSystem, full-flow filtering Steering angle ()35° Setting pressure 12Mpa Flow 138.6L/2200r/min Brake Driving brake Caliper discs, air-hydraulic actuated on all four wheel Parking brake Shoes-brake, applied by manual/air control Emergent brake Using parking brake, applied by air pressure control Maximum oil pressure 12.3Mpa Air pressure 0.71-0.784Mpa Hydraulicsystem Working pump CBZb3160R Displacement of working pump 160ml/r Control valve FPT32 Type Double valve Setting pressure 17.0Mpa Hydraulic cycle tirn(s) Raise Dump Lower9empty, float down) Total 6.5 2.5 3.5 12.5 ZL50CX with fork or side bucket Specifications fork Side bucket Overall length 8340mm 8134mm Overall width 2750mm 2950mm Overall height 3440mm 3440mm Dump height 2806mm Obverse dump:2820mm Side dump:3980mm Dump reach 1498mm Obverse dump:1173mm Rated load 5000kg 4600kg Bucket diameter Minimum clipping diameter:1000m 2.5m² Operating weight 16500kg 17000kg Equipment standard optional WD6156G3-36A D6114ZGB ZF4WG 200 transmission Automatic bucket leveler Axles Lift kick-out system General cab ROPS/FOPS cab Air conditioner Pilot control 3.0m³ General bucket 3.3m³ light material bucket 23.5-25 tyres 2.2m³ ore bucket 1.8m³ ore bucket Side-dump bucker Log forl 4.0m³ material bucket

Specifications Dimensions with Bucket A:Height to top of cab and canopy 3410mm B:Ground clearance 550mm C:Machine center point to rear axle 2167mm D:Wheelbase 3367mm E:Overall length 8034mm F:Maximum rollback at full height 57º G:Bucket dump at full height 45º H:Dump reach 1200mm I:Maximum overall height 4900mm J:Hinge pin height at full lift 4188mm K:Dump height 2970mm L:Maximum rollback at ground 41º M:Hinge pin height at carry position 500mm N:Maximum digging depth 60mm O:Width over tires 2750mm P:Tread width 2150mm Q:Turning radius outside tires 6800mm R:Maximum steering angle(each side) 35º S:Bucket width 2976mm T:Turning radius outside bucket 7770 mm