water jet cutting machine 1000*2000mm

1. intensifier pump(HD-A380) Main characters: Whole set of intensifier from America(IWP) One cylinder and two direction cycle piston style intensifier components Single row water filter system Safeguard from ultra-high pressure Electrical shift Continuous pressure adjustment by hand, the range of pressure is 50-380MPa Main technical data of intensifier pump: Max discharge of oil pump:90L/min Max water discharge:3.7L/minl Max available orifice diameter:0.3mm pressure:300MPa-420Mpa Continuous working pressure:320~340MPa Main motor power:37KW(50Hp) Power supply:380V/50HZ Touch screen to show the machine working condition and error information.

2.CNC System CNC control 19 Inch LCD is convenient for operator to observe and reduce visual fatigue Support DXF file and any auto programming software to produce NC code. The DXF file output from AUTOCAD does not need other transformation software.

It is ok to use it directly from CNC system software and make the concatenation of image in DXF file automatically.

3,Cutting table(HD-1525F) Structural style: cantilever style Valid processing range:1500mm*2500mm Z-axis journey:150mm Control accuracy: about 0.01mm Cutting accuracy: about0.1-0.2mm 4.

HP on/off valve ,cutting head and HP tube Model HD1020F HD1525F HD1530F HD1540F Processing scope 1.0m*2.0m 1.5m*2.5m 1.5m*3.0m 1.5m*4.0m Form of machine Cantilever Runing speed 0-10m/min Control system AC servo system Control accuracy about 0.01mm Cutting accuracy about 0.1mm working pressure 300Mpa-420Mpa Max.flow rate of UHP water 3.7L/min Motor power of oil pump 18.5kw/30kw Power supply 380V 50HZ