vibrating hopper feeder machine

vibrating hopper feeder machine Circular Inclined Screen Features： 1. Adjustable vibration frequency, uniform screening processing. 2. Excitation force is strong caused by block eccentric. 3. Reasonable structure, firm and durable frame. 4. Low noise, easy maintenance, usage safety 5. Rugged all-welded body. 6.

Reliable and precise feed rate adjustment by speed and stroke. 7. Minimal maintenance and high performance. 8. Minimum operating costs. 9. Simple packaged feeding solutions. It is widely used in Metallurgical Industry, Coal Mining Industry, Mining-selecting, Building Construction etc. vibrating feeder installation knowledge: 1.

Vibrating feeder is not allowed to be used where is likely to cause injury to persons premises. 2. Please install the vibrating feeder device using the hanging device which can withstand the weight of vibrating feeder, must ensure that equipment hanging institutions fully carry weight, and have a certain safety factor.

So as to avoid the risk of falling of vibrating feeder device. 3. When vibrating feeder is in the hanging and maintenance of the equipment, not allow the person standing in the bottom to operate. So that it may fall, causing no personal injury. 4. Maintenance of the feeder must be completely off the power, in order to avoid electric shock casualty officers.

5. Feeder equipment operation must be connected and ground, in operation every day should be regularly check the wiring and insulation wire skin, anti-shock on the leakage and accidents. 6. When the vibrating feeder load must be running low current operation, so as to avoid damage to equipment, core impact, so under normal circumstances, do not run empty.

How to Operate The Vibrating Feeder Correctly: 1. Don’t put anything on the Vibrating feeder when the machine is started. In this way, the motor will burn out because of too much pressure. Therefore, do check if there is something on the Vibrating feeder when you start it every time.

If something is on the Vibrating feeder, you must clear off and then start the machine. 2. The Vibrating feeder relies on belt conveyor to transfer materials, so be sure to check whether the belt is intact, whether loose or not, and whether the degree of tightness is proper.

Only when everything is normal, the performance of the machine can be brought into full play and the production will reach a maximum without damaging machine. 3. Various parts of the Vibrating feeder transfer power to the gears and chains.

It is necessary to make these gears and chains keep maximum lubrication so as the machine will not be damaged because of the lack of lubrication. 4. Ore production makes a great deal of dust, which will make the control box of the Vibrating feeder accumulate large amount of dust.

If this persists, it will make the internal circuit become short- circuited and will damage the electrical circuits and other parts. Remember to clean the dust in the control box at regular intervals. 5. the main driving force of the Vibratory feeder is the motor whose speed is very high. So you should use a reducer to slow down in the transmission.