suppy carbon black and ZINC OXIDE

N220: this applies to all kinds of rubber products, including carbon black N220 rubber wear resistance is higher by 10% -20%, to rubber to give a higher tensile strength and tear strength, and to a certain degree of electrical conductivity .

N234: using this product so that the wear of rubber is better than N220, N242, N339, particularly in the harsh high degree of use, better wear a good show, the processing of rubber goods have better performance, pressure A smooth surface for a variety of rubber N330: This product is a reinforcement of good performance of carbon black to rubber to give better strength and elongation, tear and abrasion resistance and flexibility, so that by using this product with the birth of a rolling series of losses in the N330 Only with the large carbon black N351, than other varieties are small, scattered rubber Service Properties and the pressure is also better for a variety of natural rubber and synthetic rubber.

N339: This product in the tread rubber reinforcement performance, wear resistance and anti-cracks in an increase of nearly N220 carbon black, squeeze better performance, especially suitable for rubber-cis-butadiene rubber and family.

N326: This product of natural rubber in the slot with close to the black rubber mechanical, and do not delay the speed of curing, the rubber elongation higher. Tensile strength and other similar rubber.

N375: use of the goods and N339 is basically the same as for car tires, heavy-duty off-road tires and tire tread rubber, but also to cover rubber conveyor belt, and so on N550: This product is easily dispersed, can be given to rubber very high, the pressure fast, smooth surface pressure, high temperature properties of vulcanized rubber and good thermal conductivity properties, reinforcing the performance, flexibility and resilience are better N660: this applies to all kinds of rubber products, and semi-reinforcing furnace black, of the goods have a high structure and smaller particles, easily dispersed in rubber, rubber vulcanization of tensile strength, tear strength and stretch will be High stress, deformation and smaller, low-heat, flexible and flex-resistant Qu good.

N772: for the tire carcass and molded products N774: the use of the N774 carbon black rubber process better performance, the amount of filler can also be very high, the vulcanization of rubber flexible, low-heat, good dynamic performance