steel wall framing stud

American standard drywall metal stud wall angle sizes a popular way to be used to divide the space,especially using in commercial buildings. CE approved

1) Material: galvanized steel 2) Zinc coating: from 100~275g per square meter 3) Yield strength400mpa. 4)Thickness : Form 0.50mm to 2.0mm . 5)Dimension : Length : up to 11.85 meters ,Width : From 40mm to 250mm and Hight from 30mm to 80mm

Stud and track for partition wall 1. Stud size: 50 x 45mm, 50 x 40mm, 50 x 35mm, 75 x 25mm, 75 x 35mm, 75 x 45mm, 100 x 45mm 2. Track size: 50 x 40mm, 50 x 35mm, 75 x 30mm, 75 x 40mm, 100 x 40mm 3. Length: 2. 7mm, 2. 8mm, 2. 9mm, 3. 0mm 4. Thickness: 0. 35mm, 0. 4mm, 0. 45mm, 0. 5mm, 0. 6mm All sizes and shapes of steel channels are available

Ceiling Channel for ceiling system 1. Supporting channel: 38 x 12mm, 30 x 27mm, 50 x 12mm, 50 x 15mm, 60X27mm 2. Covering channel: 50 x 19mm, 60x 27mm 3. Length: 2. 7mm, 2. 8mm, 2. 9mm, 3. 0mm 4. Supporting channel: 0. 5mm, 0. 6mm, 0. 8mm, 1. 0mm, 1. 2mm 5. Covering channel: 0. 35mm, 0. 4mm, 0. 45mm, 0. 5mm, 0. 6mm 6. Wall angle: 25 x 25 x 0. 4mm / 0. 5mm / 0. 6mm Packing: 10pcs in bundle

All sizes and shapes of steel channels are available.

Features:

(1)Lightweight to carry and handle.

(2)High-quality steel: its surface is smoothness and it hard to distortion.

(3)Rust- proof and Corrosion- resistant: High Zinc Coating of 100 g/m2.

(4)New-type earth-friendly products: galvanized steel-no radiation, not

hazardous material, not pollute the environment.

The light steel keel material has very well mechanical property, high precision on size, well linearity, flat panel. It is ametabolic and it can avoid cranny causing by ceiling installation. Fixity is very good during installation, with unique pocked technique. It is good for avoiding selftapping screw sidesliping.

It not only improve the speed of construction, but also assure the locked-in connection among materials.

Drywall instalation:

1. Fasten U keel to the plate according to the 600mm distance, using some fixities. 2. C keel, U keel, or special keel can be used to reduce cutting. 3. Make it upright with the wall during installing C keel, using proper fixity to fasten, using screws according to 600mm distance, and install another side of C keel after installing U keel of ceiling. 4.

Put U keel of ceiling on C keel of the wall, fetch a C keel, distance is 600mm to make ceiling upright with U keel, and fasten with proper fixity. 5. Mark on the floor and ceiling at each 400mm or 600mm distance to decide the installation location of next C keel. 6.

If C keel touches doorframe, the doorframe has to be fastened by fixity or fasten keel calliper on freely keel before fastening the doorframe.

Application:

Interior partition wall or veneering wall of hotels, theaters, emporiums, factories,

office, house, airplane-terminal buildings, bus stations, waiting lounge, etc.

Item Description Width (mm) Hight 1(mm) Thickness (mm) Length 1 WALL STUDS 40,50,63, 70,75,91, 100,120,150, 200 ,250 , from 40mm to 250mm .

30 0.40~ 2.0mm up to 11.85 meters 32 0.40~ 2.0mm up to 11.85 meters 35 0.40~ 2.0mm up to 11.85 meters 36 0.40~ 2.0mm up to 11.85 meters 37 0.40~ 2.0mm up to 11.85 meters 45 0.40~ 2.0mm up to 11.85 meters 45 0.40~ 2.0mm up to 11.85 meters 50 0.40~ 2.0mm up to 11.85 meters 2 TRACKS 41,52,65, 72,77,92, 102,122,152, 202 ,252 from 41mm to 252mm .

30 0.40~ 2.0mm up to 11.85 meters 32 0.40~ 2.0mm up to 11.85 meters 35 0.40~ 2.0mm up to 11.85 meters 36 0.40~ 2.0mm up to 11.85 meters 37 0.40~ 2.0mm up to 11.85 meters 45 0.40~ 2.0mm up to 11.85 meters 45 0.40~ 2.0mm up to 11.85 meters 50 0.40~ 2.0mm up to 11.85 meters

WELCOME TO CUSTOMIZE AND CAME TO OUR FACTORY .