solar water heater 500L

1. Heat Water Character
1)Vacuum magnetron sputtering coating, high absorptivity, span life above 25 years.
2)Special medium for heat conduction, high heat conductivity,
3)4050mm thermal insulation filled with fiber glass, good thermal insulation.
4)Modularization installation of collector, effect construction integration..
5)Laser welding between absorber and copper tubes.
6)Medium adapt to temperature -40~180.
7)Collector peak power: 2.7KWH/m²
8)Anti-ice ball shock: bear front impact of φ25mm ice ball.
9)Heat water volume: produce heat water5570-80L/day per square meter collector at forced circulation.

2. Water Tank-Volume (Litre) 500L
-Low heat loss, good thermal insulation effect.
-Heat exchanger is composed of copper heaters.
-Porcelain Enamel and Stainless steel Inner Vessel for Corrosion Resistance protection.
-- Optimization of the diameter and height rate to store water
-- Water tank 3 year warranty, parts and heater movable one-year warranty
-- Fully enclosed design, not subject to water pressure and air pressure fluctuations, particularly applies to low water pressure areas.
-Floor-standing, wall-mounted (vertical), indoor and outdoor can be installed

and Temperature Controller
-Fully automatic temperature controller, adjust water temperature 50-85, automatic constant temperature.
-Multi safe security function
-Automatic power cutting protect at high temperature
-Temperature safe valve protection
-Pressure safe valve protection
-Fully automatic temperature protection
-Anti-back flow protection
-Ground protection

4.Collector

Specifications	FP-GH2.15 FP-GV2.15
Dimension LxWxH (mm)	2050*1050*95
Gross Area (m2 )	2.15
Aperture Area (m2 )	2
Absorber Area (m2 )	2.05
Number of covers	1
Cover material	Low iron,tempered glass
Cover Thickness(mm)	3.2
Cover Transmission	>92%
Weight	39Kg
Absorber
Material	Aluminium board
Surface Treatment	Sputtering (cermet)
Absorptivity	95±2%
emissivity	5±2%
Construction Type	Grid type
Header Material	Copper TP2/CA1220
Header tuber size	18 or 22mm*Thickness 0.8mm
Riser Material	Copper TP2/CA1220
Riser tuber size	8mm* Thickness 0.75mm
Work Pressure	0.6Mpa
Test pressure	1.2Mpa,keeps 5 minutes
Thermal Insulation
Insulation Material	Fiberglass
Insulation Thickness	455mm
Density	35kg/cube
Casing
Frame	Aluminum alloy
Frame Color	silver or black
Back Plate	Aluminum plate or over shell
Max Operation Temperature	85
Sealing Gasket	EPDM