solar panel

Typical Electrical Characteristics Rated power (Pmax)3: 165 W Voltage at Pmax(Vmp) : 35.2 V Current at Pmax(Imp) : 4.7 A Short-circuit current (Isc) : 5.1 A Open-circuit voltage (Voc): 44.2 V Module efficiency : 16.0% Tolerance: +5/-3% Nominal voltage : 24 V Temperature coefficient of Isc : (0.065±0.015)%/°C BP3165 Temperature coefficient of Voc: - (160±20)mV/°C

Temperature coefficient of Pmax: - (0.5±0.05)%/°C NOCT : 47±2°C (Air 20°C Sun 0.8kW/m2, wind 1m/s) Maximum Series fuse rating : 15A (T); 20A (J) Maximum system voltage: 600V (U.S.

NEC rating); 1000V (IEC 61215 rating); 1000V (VDE rating) Mechanical Characteristics Solar Cells: 72 cells (125x125mm), 6x12 matrix connected in series Front : High-transmission 3.2mm tempered glass Encapsulant : EVA Back : Polyester Frame : Clear Silver anodized aluminum alloy type 6063T6 Universal frame Diodes: IntegraBus™ technology includes Schottky by-pass diodes integrated into the printed circuit board bus Junction box: J-Version junction box with 6-terminal connection block; IP65, PG13.5 M20,1/2 inch conduit,or cable fittings accepting 6-12mm diameter cable Terminals accept 2.5 to 10mm2(8 to 14 AWG) wire Output Cables: RHW AWG# 12(4mm2) cable with polarized weatherproof DC rated Asymmetrical lengths: -1250mm (-) and 800mm (+) Dimensions : 62.5" x 31.1" x 2.0" (1587 x 790 x 50 mm) Weight : 33.95 lbs.

(15.4 kg) Qualification test parameters Temperature cycling range: -40°C to +85°C Damp heat test 85°C, 85% relative humidity Front and rear static load test (e.g.: wind) 2,400pa (50psf) Front load test (e.g.:snow) 5,400pa (113psf) Hailstone impact test 25mmΦ(1 inch) at 23m/s(52mph) Warranty Free from defects in materials and workmanship for 5 years; 93% power output over 12 years; 85% power output over 25 years.