solar lamp

technical specification material :transparent plastic PC/ABS

battery :valve non-maintained tead acid battery 4V/3.5AH

light power :LED*4pcs super bright 0.5w

charge time:12hours charged BY AC current ,22hours charged by solar energy

size :170*170*265MM

net weight :1.06kg Gross weight:1.35kg

WARNING

*Read and seve these instructions before using ,and charge the lamp before using

*Please insure tht the battery has full charge when using ,and charge it in time if the light is dim

*Charge the unit in regular time .To insure the best status of the portable lamp

*Plaese put the switch to “O”after use

*The power will reduce when the lamp is used under 0C or 40C above.

OPERATING INSTRUCTIONS

1、 You can place the unit under sunlight directly if you want to charge with solar energy ,but pay attention that the solar energy board should not be sheltered.

2、 If you want to use AC current to charge ,please insert charger to DCIN ,then connect the power ,LED will be bered while charging and it will turn green after completed

3、 There are two settings:setting I is much bright but the illumination time is shorter ,and settings II is lower bright ,but the illumination time is longer

4、 This unit is intelligence reacion controlled,when the solar energy board reacts with strong sunlight the lamp will be auto-off ,but when the sunlight reduces to a certain data ,the lamp will be auto-on.

5、 USB charging :A the outer mobile phone charge machine into DC5.5charging hole (and 220V charging hole shared ),to match USB connection and phone line can charge th ephong ,B,with the USB interface,portable lights and mobile phones can be.