silicone rubber for shoe sole mold making

silicone rubber be used for shoe molds, sand casting, sole sampling, plaster mold making. simple products, products with non-complex patterns, as well as product models with stable size and all kinds of samples,and the curing agent is free.

2.Using Instruction:

Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.

Note: the product is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.

Any further imformation requried,pls feel free to send hyf(at)szrl(dot)net,also can call the number of 0086-755-89948019 and the mobile 0086-15012905993.Welcome to visit www(dot)szrl(dot) anytime.