reactor

1: The usage scope In the circuits of the compensation, the harmonic, the inrushing current and some other factor may cause possible damage to the capacitors. Therefore, it is very necessary to use the reactor together along with the capacitors.

In this way, some serious harmonic can be restrained and the stability and quality of the electrical system will be largely improved. When the harmonic is very serious, the reactor must be used 2: Features A: The reactor is devided into three phase and single phase two kinds, all iron core is dry.

B: Adopting the silicon steel sheet and copper wire with high quality and insulating strength. C: High inductance accuracy. The running accuracy of the filter circuit and the filter effect can be guaranteed if it works with filter capacitor together. D: Reasonable design and excellent manufacturing technique; Low temperature rise and noise.

Technique Specification 1, Rated input voltage: 380V/660V/1140V 2, Reactive Strength: Core-Winding 3000VAC/50Hz/60S Free of arcing breakage 3, Insulation Resistance: Core-Winding 500VDC,insulation resistance≥100MΩ 4, Reactor’s noise is less than 65dB(to be measured at the point 1 meter away from the reactor horizontally) 5, Protection class:IP00 6, Insulation class: F/H 7, Standard: IEC289:1987 Reactor GB10229-88 Reactor(equivalent to IEC289:1987) JB9644-1999 Reactor for semi-Conductor transmission GB6450-86 equal to national standard IEC 726(1982) Dry Type Powder Transformers 8.

Environment exists without gas, steam, chemical deposition, dust or dirt that will affect transformer’s insulation seriously, explosive or corrosive medium is not allowed.