pure sine wave inverter C2000W/48V

Feature

High performance MCU chip control, high reliability;

The main switch device of the controller is the low loss and long life MOSFET;

Closed-loop PID algorithm control, improve the dynamic response of the system output, improve the output power quality;

Pure sine wave output, smaller waveform distortion rate ;

Innovative energy saving mode, so that the no-load loss is greatly reduced, suitable for intermittent load;

Wind energy and solar energy complementary input, wide range of applications;

Wind generator with automatic brake protection and manual shutdown protection;

With independent unloading device, effectively protect the battery safety;

Running status and fault indicator light;

Strong ability of overload and starting power, bring inductive load such as refrigerator, compressor etc. Perfect protection function, supports English display;

EMI/EMC of the input and output;

Easy and quick maintenance;

Smaller size, simple structure, easy installation.

specification

Model C2000-24 C2000-48 Battery input Rated voltage（VDC） 24 48 Max by pass current（A） 98 51 Input voltage range （VDC） 20.5～32 39～66 Under voltage protection （VDC） 20.5 39 Less Voltage recovery （VDC） 25 48 Over voltage protection（VDC） 32 66 Over voltage recovery（VDC） 28 59

Solar and wind energy input Solar and wind complementary input power Solar power input + wind power input < inverter power output Solar battery charging mode Solar charging PWM control Wind battery charging mode DC charge Max solar open-circuit voltage（VDC） 80 Allow the input Solar wind each one input Charging current rating（A） 67 33 Float charging voltage（VDC） 27.5 55.5 Start unloading voltage（VDC） 28 56 Overcharge protection voltage（VDC） 32 66 Charge recovery voltage（VDC） 28 56 AC output Rated power 2000VA 2000VA Peak power 4000W 4000W Rated voltage and frequency 220VAC、50HZ Max output Current（A） 9.5 9.5 Output voltage accuracy 220VAC±2% Output frequency accuracy 50HZ±0.05 Output waveform distortion rate ≤4% Dynamic response（load0～100%） 5%，≤50ms Inverter efficiency（80% Resistive load） ≥85% Full load efficiency 93% 93.5%

No-load loss 7.0W 13W Energy Saver with No-load less 1.4W 2.6W The output phase single Protection Over-load protection 120%，120s / 200%，5s Protective function Input reverse connect protection (only damage insurance), input under-voltage protection, input output over-voltage protection, overload protection, output short circuit protection Operation mode Continuous operation Cooling method Forced convection cooling Short circuit protection Restart machine Work environment ,size Protection grade IP20 Work altitude（m） ≤3000 Work temperature （℃） -15～+45 Storage temperature （℃） -25～+85 Noise（dB，1m） ≤50 Size：（Lx W x H mm） 390mm x 255mm x 120mm Weight（Kg） 18 18