pressure switch water level switch

Technique--Technique--Senate--Number

lt;dnt> </dnt> electricity parameter: 0.1A/10A--125V/250V--AC 10A 250V AC 5A 36V DC

lt;dnt> </dnt>----------0.5A/16A--6V/28V--DC Contact resistance: ≤50mΩ

lt;dnt> </dnt> dielectric resistance: 500V-DC- lasted 1min,≥50MΩ Electric strength: 1500V--1min--Lasted 5s

lt;dnt> </dnt> is suitable the pressure: Barometric pressure: 5pa~2000pa---------- Negative barometric pressure: - 5pa~-2000pa

lt;dnt> </dnt> top pressure: 5000Pa. Connection size: Diameter φ6mm

lt;dnt> </dnt> is suitable the medium: Must has sighs, the water, liquid <dnt> </dnt> to install the way: Welding, segment or direct assembly Control mode: Opens, closes the way

lt;dnt> </dnt> electricity principle: Installs the way: --Vertical installment

lt;dnt> </dnt> principle of work: When the turning on negative pressure source achieves the working pressure, <dnt> </dnt>----------The switch often the make-and-break opens, often opens the connection. When the turning on positive pressure source achieves the working pressure, <dnt> </dnt> Closes often the make-and-break to open, often opens the connection. Realizes to the electricity the control.

lt;dnt> </dnt> model application: This product is the double barrel connections, is suitable in <dnt> </dnt>----------Barometric pressure, water monitor. After the pressure achieves the hypothesis the pressure, this switch connection, passes <dnt> </dnt> The peripheral device controller realizes the control instruction.

lt;dnt> </dnt> product application schematic drawing

lt;dnt> </dnt> attention: ----Meets the entrance to install as far as possible in the loose flux centralized mouth place, turns on tube <dnt> </dnt> suitably not to be long, in order to avoid influence wind power. Cannot seal up the connection.