pressure switch water level switch,

Wind pressure switch, fluent sensor, vacuum cleaner pressure switch, water level switch ---------Technique--Technique--Senate--Number lt;dnt> electricity parameter: 0.1A/10A--125V/250V--AC 10A 250V AC 5A 36V DC lt;dnt> ----------0.5A/16A--6V/28V--DC Contact resistance: ≤50mΩ lt;dnt> dielectric resistance: 500V-DC- lasted 1min,≥50MΩ Electric strength: 1500V--1min--Lasted 5s lt;dnt> is suitable the pressure: Barometric pressure: 5pa~2000pa---------- Negative barometric pressure: - 5pa~-2000pa lt;dnt> top pressure: 5000Pa.

Connection size: Diameter φ6mm lt;dnt> is suitable the medium: Must has sighs, the water, liquid to install the way: Welding, segment or direct assembly Control mode: Opens, closes the way lt;dnt> electricity principle: Installs the way: --Vertical installment lt;dnt> principle of work: When the turning on negative pressure source achieves the working pressure, ----------The switch often the make-and-break opens, often opens the connection.

When the turning on positive pressure source achieves the working pressure, Closes often the make-and-break to open, often opens the connection. Realizes to the electricity the control. lt;dnt> model application: This product is the double barrel connections, is suitable in ----------Barometric pressure, water monitor.

After the pressure achieves the hypothesis the pressure, this switch connection, passes The peripheral device controller realizes the control instruction. lt;dnt> product application schematic drawing lt;dnt> attention: ----Meets the entrance to install as far as possible in the loose flux centralized mouth place, turns on tube suitably not to be long, in order to avoid influence wind power.

Cannot seal up the connection.