pneumatic booster machine

1.The C-body design, use small space and easy to operate.

2.Using the Principle of supercharger, get high speed and large output forces.

3. No hydraulic system noise, can save electricity consumption and thus reduce production costs.

4. Output adjustment as easy as adjusting the air pressure, can achieve the required pressure.

5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.

6. Key and Foot Switch two cycle start modes. Pressure Speed can be adjusted.

7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.

Technical parameters

Max working height 230mm

Total stroke 100mm

Pressure stroke 15mm

The size of the working table 280x240mm

Pressure 0.4-0.7Mpa

Mold mounting hole φ25mm

Power AC220V,50HZ

Using pressure Theory pressure Theory pressure Theory pressure

0.4Mpa 6.88KN(112kgf) 13.49KN(181kfg) 25.75KN(181kfg)

0.5Mpa 8.75KN(140kgf) 16.93KN(227kfg) 32.33KN(227kfg)

0.6Mpa 10.17KN(168kgf) 20.33KN(272kfg) 38.57KN(272kfg)

0.7Mpa 11.82KN(196kgf) 23.61KN(317kfg) 44.87KN(317kfg)

Defferent capacity of the machine ,the special request of the stroke,the working table are also pavailable.

We can also design the specail hydraulic press machine,hydraulic riveting machine,pneumatic machine for your actual needs.

Welcome to contact me at anytime.