mobile phone signal repeater FS10

Detailed Product Description Frequency Shift Repeater Consist of a mast unit and one or more salve units Easy installation and expansion MGC and ALC 1) Wide band repeater to support all signals within one single system 2) ETSI & 3GPP 3GPP2 standards 3) Support any cellular devices(voice data video) 4) SOHO solution for small or medium areas 5) Alarm LED's for error detection 6) Manual gain control for UL and DL 7) Link UL & DL Automatic gain control 8) Auto shut down if oscillation is detected 9) Universal power range of 90V-265V 10)Small size light weight low power consumption Electrical specification Uplink Downlink Frequency Range CDMA800 824 ~ 849 MHz 869 ~ 894 MHz CDMA1900 1850 ~ 1910 MHz 1930 ~ 1990 MHz GSM850 824 ~ 849 MHz 869 ~ 894 MHz GSM900 & EGSM 880 ~ 915 MHz 925 ~ 960 MHz DCS 1710 ~ 1785 MHz 1805 ~ 1880 MHz PCS 1850 ~ 1910 MHz 1930 ~ 1990 MHz WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz AWS 1710 ~ 1755 MHz 2110 ~ 2155 MHz Link Frequency Range Available upon request Donor unit Gain ≥ 80dB Sever unit Gain ≥ 70dB Link output Power ≥ 20dBm Sever output Power ≥ 10dBm Band width (-3dB) available upon request MGC ( Step Attenuation ) ≥ 31dB / 1dB step Automatic Level Control ≥ 15dB, auto shut off after 15dB Gain Flatness GSM & CDMA Tpy ≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) WCDMA ≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) Noise Figure ≤ 6dB VSWR ≤ 2.0 Group Delay ≤ 1.5μs Frequency stability ≤ 0.01ppm Spurious Emission & Output inter-modulation GSM Meet ETSI TS 151 026 V 6.1.0 WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) CDMA Meet IS95 & CDMA2000 WCDMA System Spurious Emission Mask Meet 3GPP TS 25.143 ( V 6.2.0 ) Modulation Accuracy ≤ 12.5% Peak Code Domain Error ≤ Factor 256 CDMA System Rho ρ > 0.980 ACPR Meet IS95 & CDMA2000 LED Alarm Standard Power LED Power Indicator ALC LED Orange ALC 1~5dB, Red ALC 15dB~20dB, LED off after 5 seconds red color Mechanical Specifications Standard I /O Port N-Female Impedance 50 ohm Operating Temperature -25ºC~+55ºC Environment Conditions IP40 Dimensions Donor Unit 218x155x65mm Slave Unit 218x155x65mm Weight Donor Unit ≤ 1.2Kg Slave Unit ≤ 1.2Kg Power Supply Input AC90~264V,output DC9V / 3A