magnetic vibration feeder

magnetic vibration feeder MAGNETIC VIBRATING FEEDER Magnetic vibrating feeder introduction: Magnetic vibrating feeder can transmit loose material equably and continuously. Such as cement, flour, corn, sand, stone and coal etc, of which the loose material is powdery, grain.

It is widely used in mining, metallurgy, coal, light industry, power, chemical, food and other industries. Features： (1)It can be adjusted to the quantity, can be used for automatic control of the production process, production automation. (2) No rotating parts, no lubrication, simple structure, easy maintenance.

(3) The material was micro projectile motion, trough wear. (4) Trough made of alloy steel plate, heat transfer can be used, worn out, and corrosive materials. (5) Can be instantly changed, and hoisting the material flow, so to feeding amount with high precision. (6) High efficiency, consume less power.

GZD electromagnetic vibrating feeder installation instructions： This series of electromagnetic vibrating feeder design recommendations declination 10 ° installation, materials and water for more viscous materials can be lowered to 15 °, such as the feeder for the batching, dosing or automatic weighing, in order to ensure uniformity and stability to the feeding amount, to prevent the material gravity, the level of the feeder should be installed to use.

How to Operate The Vibrating Feeder Correctly 1. Don’t put anything on the Vibrating feeder when the machine is started. In this way, the motor will burn out because of too much pressure. Therefore, do check if there is something on the Vibrating feeder when you start it every time.

If something is on the Vibrating feeder, you must clear off and then start the machine. 2. The Vibrating feeder relies on belt conveyor to transfer materials, so be sure to check whether the belt is intact, whether loose or not, and whether the degree of tightness is proper.

Only when everything is normal, the performance of the machine can be brought into full play and the production will reach a maximum without damaging machine. 3. Various parts of the Vibrating feeder transfer power ba the gears and chains.

It is necessary to make these gears and chains keep maximum lubrication so as the machine will not be damaged because of the lack of lubrication. 4. Ore production makes a great deal of dust, which will make the control box of the Vibrating feeder accumulate large amount of dust.

If this persists, it will make the internal circuit become short- circuited and will damage the electrical circuits and other parts. Remember to clean the dust in the control box at regular intervals. 5, the main driving force of the Vibratory feeder is the motor whose speed is very high. So you should use a reducer to slow down in the transmission.