hight quality anti static pvc flooring

(1)the requirements of foundation
ground should be waterstone ground, caramic tile groud, wooden ground or cement ground.
ground should be smooth and unflatness should be less than 0.2%.
ground should have enough strength and no the phenomenon of sand comimg out and separation.
ground should be is necessary for a new ground to dry about 30days.

(2)Procedure of construction
Clean the ground→spread the earthing conductive net→lead out the earthing line→coat strong adhesive→coat conductive adhesive→lay floor→welding floor→cleaning→inspect properties

(3)Maintenance of floor
is not permitted that sharp and rough heavy matters scribe and drag on the surface of floor and that personnel who wear shoes with nails walk on the floor should be kept cleaning.
is not permitted that the chairs which have black rubber cushion put on the floor in order to avoid black sulfied polluting its surface.
there are oil or dirty on its surface, it may be cleaned with there is scribed sign, if can be recovered through fine abrasive paper.
there are heavy oil and dirty caused by install factory has special washer to clean them.
factory also has anti-static wax that can be used to maintain the general, it should be coated one time every six the personnel walking on the floor are busy, it should it should be coated every three months.