heat transfer printing ink

1. Available Range: Fit for sheet－fed and single-color printing machine and two-color or multi-color offset printing press. Its mainly printing materials are art paper, coated paper, offset sheet/gelatine printing paper and Paper Jam. 2. Product Characteristics: 2.1 Be able to adapt to a medium-speed and a high-speed printing needs.

2.2 Under normal circumstances, keep no membrane (or film) in the printing press ink fountain within 36 hours. 3. Color: Magent, yellow, cyan and black. 4. Printing performance: good ink-water balance, sharp halftone dot restoration, fast fixation, and good stability on this machine.

Usage: Under normal printing circumstances be able to be used directly on the machine. 5. First work out a sample and print, if no large deviation, then decide sample printing. Since heat transfer ink/sublimation ink will color the gas, the printing can not be carried out according to the normal proportion. 6. A list of the desired temperature about printing

Fabric Name Transfer Printing Temperature Pressure Time polyester fabric 205oC~220oC 0.5kg/cm2 10~30 seconds Polyester distortion low stretch fabric 195oC~205oC 0.5kg/cm2 30 seconds cellulose triacetate fiber fabric 190oC~200oC 0.5kg/cm2 30~40 seconds acrylic fabric 200oC~210oC 0.5kg/cm2 30 seconds two-acetate fiber fabric 185oC 0.5kg/cm2 15~20 seconds nylon fabric 195oC~205oC 0.5kg/cm2 30~40 seconds modacryl(变性聚丙晴纤维) 190oC~220oC 0.5kg/cm2 10~15 seconds

7. Applied performance: Colour Fastness solarization red yellow cyan black 5~6 6 3 3 8. Heat transfer printing temperature should refer to polyester fabric temperature after Alumina Sette, stainless steel, copper and china are coated. 9.. Packing Specification:1~2kg/ iron tin Guarantee Period: thhree years