film faced plywood

Film faced plywood for construction,we processed this product with very high temperature and hot-pressuring,the quality is stable,the bending is slight,it has smoothly face and highly strength,it is easy to cut kinds of sizes that you need,installment and takedown are very can be used many times, compared with steel mould,it can reduce cost very much,it is your perfect choice.

1st, weight light: Is suitable for the high-rise construction and the bridge construction.
2nd, easy to cut kinds of pieces you need,enhances the mold working efficiency.
3rd, does not warp, does not crack, does not delaminate,waterproof affect very good, the water boils for 24 hours not to open , the installment and takedown very easy,theturnover number of times high, the service life is long.

1st, moisture content <= 10%
2nd, density 0.75/Above cm3
3rd, wear value <= 0.1g/100r (peaceful rice dregs)
4th, impact intensity: 40kj/M2
5th, elasticity coefficient >= 5000MPa >= 7948MPa;
6th, static tune intensity >= 24MPa >= 75.8MPa
7th, angularity <= 1%
8th, thickness common difference ±0.5mm
9th, thickness expansion rate (72 hours normal temperature water immersion) <= 8%