bunching machine

2.Outer diameter of wire: φ0.24~φ1.6mm

3.Crossection area: φ0.05~φ2.5mm2

of take up spool: φ500mm×length320mm×inner coreφ70mm

5. Maximum rotating speed: 2200RPM

of traverse: φ20mm rolling ring traverse,winding pitch and breadth are adjustable.

7. Standard lay length: 5.85~53.73mm (enclose list of standard lay length).

8. Main motor: 5.5KW AC motor +frequency converter

9. Weight of copper load: about 200kg

10. Direction of strand: optional for right or left

11. Brake: electromagnetic brake for external break, automatic stop when wire reach setting meter.

12. Tension control: take up tension is controlled by magnetic powder clutch, PLC follows up and regulates tension ,constant tension.

13. Drive bearing: it is adopted imported Japan bearing.

14. Synchronization strap: it is adopted imported American product.

15. Spool from top to bottom: it is adopted manual pump hydraulic landing.

16. Direction: this machine is on your left, when you are in the face of front door, and pay-off on your right (may according to client’s requirements to make).

17. Protection: auto-brake for wire breakage external and internal, auto-stop when achieve the preset length.

18. Safety measure: all raising platform and doors can not be started and auto-brake when they are not in the exact position.

19. Meter counter: digital meter counter made in Taiwan

20. Coating: apple green

22.Dimension: (length×breadth×height): 2620×1235×1230

23. Weight: 2300Kg