alarm meter

High frequency equipment-specific instructions instrument Upper and lower limits with alarm function ammeter, voltmeter:CH-120H,CH-120HL The product uses infrared light control design, when more than set the value, the output-related control signal, and immediately cut off the associated control points, so that the equipment is being used to security.

Widely used in high frequency equipment, testing equipment and testing machines and other areas of the transformer.

On its applications: If the machine at high load, low load and a serious problem, the most likely to affect the normal operation of electrical and mechanical equipment, which led to failure, in order to ensure the normal operation of electrical and mechanical equipment, the need to install this controller has the exact sensitivity grasp the function of load conditions, and play monitoring the effectiveness of warning.

At the same time functional control of its machinery and equipment to provide precise output control.

Such as: the current high frequency mechanical equipment, the products produced in the defect rate of 20 to 30%, producing a bad product so high that there is no reason to make accurate power output, output control is now current meter, time relay, Ammeter plus manual control will appear artificial at the table, manual two errors of human vision, time control will be a good time in a fixed point, the power is too small or too large instability.

If the use of current and voltage limit control table, which allows each output current is consistent, does not appear too large, too small problem, and that produced the product defect rate will be reduced to 1 to 5% even lower, consistency is very accurate, thus saving more resources, reduce business costs.