ademco alarm systems | burglarproof

1. 12-zones (8 wireless and 4 wired), 8 wireless zones can be expanded up to 24 sensors.

2. Support to CONTACT ID protocol.

3. Access codes, 1 installer code, 1 master code, 8 common user codes and address codes.

4. Dial 5 telephone numbers (mobile and pager number). Alarm telephone is priority.

5. Compatible with DTMF and pulse dailing.

6. Phone line be cut or short-circuit will send an alarm. ( indicator or siren for optional)

7. Remote Arm, Disarm, monitor and on-site alarm setup.

8. Automatically learning code between wireless PIR detector, remote controller and main console (8 wireless can be up to 24 zones and 8 remote controllers).

9. Wired zone responds speed (5ms-1000ms) and support (Normal Open, Normal Close and end of line resisitance) at freedom.

10. Zone attribute can be programmed for fire alarm, medical alarm, emergency alarm at freedom. Each zone can be programmed with different remote controllers.

11. Two timers can be set to Arm/ Disarm independently.

12. Voice pre-recorded.

13. Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.

14. Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and salve detector power lower will send alarm.

15. Work with wired/ wireless siren and linkage device.

16. Lastest 20 pieces alarm can be recorded and can`t be deleted. Last Arm/ Disarm time can be remembered.

17. Mian unit and slave detector make communication times in 24 hours to check whether there is communication malfunction. If there is a malfunction, the main console will alert corresponding zone within 26 hours.

18. Slave detector sends report to main unit once it is turn on. Mian unit will indicate.

19. Both AC220V and 12V 1.2AH storage battery power supply, and change automatically.

20. Telephone lightingproof.

Technological Parameters

1. For home, office, store, residence use

2. Working voltage: 220V AC +/- 15%, 9.6 - 14V DC

3. Waiting current: ≤35mA

4. Dual-frequency dialing and impulse dialing

5. Wireless frequency receiver: 433MHz

6. Wireless distance receiver: ≥500m

7. Alarm voice range: ≥100dB/1m2