Yellow and Green Striped Heat Shrink Tubing

 Description The yellow and green striped heat shrink tubing is made of environmentally friendly polyolefin through co-extrusion and radiation of the two color masterbatches with extruders and special electronic accelerators separately. The product is flexible and highly flame retardant, with lasting bright color and stable performance.

This product is widely used to identify ground wire and terminals or insulate in-line connections..

 Features  Flexible, highly flame retardant  Min. shrink temperature:70 ℃  Max. shrink temperature:125 ℃  Continuous operating temperature: -55 ℃ ~ 125 ℃

 Heat shrink ratio: 2:1, 3:1  Environmental standards: RoHS  Color standard: green and yellow

 Technical Data Properties Typical Data Test Method Tensile strength（MPa） ≥10.4 ASTM D2671 Elongation（%） ≥200 ASTM D2671 Teagingnsile strength after heat (MPa) ≥7.3 158℃×168h Elongation after heat aging(%) ≥100 158℃×168h Longitudinal change -8%～+8% ASTM D 2671 Flammability Pass UL 224 VW-1 Heat shock No cracking, no dripping UL 224，250℃×4h Dielectric strength ≥15kv/mm ASTM D 149 Volume resistivity(Ω cm) ≥1014Ω.cm IEC 60093

 Dimension( shrink ratio:2:1 )

Size Expanded Internal diameter(mm) Recovered(mm) Standard Package m/spool Internal diameter Max(mm) Wall thickness（Min） φ1.0 1.5±0.3 ≤0.7 0.28±0.10 400 0.75～0.90 φ1.5 2.0±0.3 ≤0.9 0.30±0.10 400 0.95～1.40 φ2.0 2.5±0.3 ≤1.0 0.35±0.10 400 1.10～1.80 φ2.5 3.0±0.3 ≤1.3 0.36±0.10 400 1.35～2.30 φ3.0 3.5±0.4 ≤1.5 0.38±0.10 400 1.60～2.70 φ3.5 4.0±0.4 ≤1.8 0.40±0.10 400 1.85～3.20 φ4.0 4.5±0.4 ≤2.0 0.45±0.10 400 2.10～3.60 φ4.5 5.0±0.4 ≤2.3 0.45±0.10 200 2.35～4.00 φ5.0 5.5±0.4 ≤2.5 0.45±0.10 200 2.60～4.50 φ6.0 6.5±0.4 ≤3.0 0.50±0.10 200 3.10～5.40 φ7.0 7.5±0.4 ≤3.5 0.50±0.10 100 3.70～6.30 φ8.0 8.5±0.5 ≤4.0 0.55±0.10 100 4.20～7.20 φ9.0 9.5±0.5 ≤4.5 0.55±0.10 100 4.70～8.00 φ10.0 10.5±0.5 ≤5.0 0.55±0.10 100 5.20～9.00 φ11.0 11.5±0.5 ≤5.5 0.60±0.10 100 5.70～10.0 φ12.0 12.5±0.5 ≤6.0 0.60±0.10 100 6.20～11.0 φ13.0 13.5±0.5 ≤6.5 0.60±0.10 100 6.70～12.0 φ14.0 14.5±0.5 ≤7.0 0.65±0.10 100 7.30～13.0 φ15.0 15.5±0.6 ≤7.5 0.70±0.10 100 7.80～14.0 φ16.0 17.0±0.6 ≤8.0 0.70±0.10 100 8.30～15.0 φ17.0 17.5±0.6 ≤8.5 0.70±0.10 100 8.80～16.0 φ18.0 19.0±0.7 ≤9.0 0.70±0.15 100 9.30～17.0 φ20.0 22.0±0.7 ≤10.0 0.75±0.15 100 10.4～19.0 φ22.0 24.0±0.7 ≤11.0 0.80±0.15 100 11.4～21.0 φ25.0 26.0±0.7 ≤12.5 0.90±0.15 50 12.8～24.0 φ28.0 29.0±0.7 ≤14.0 0.90±0.15 50 14.4～29.0 φ30.0 31.5±0.7 ≤15.0 0.95±0.15 50 16.0～29.0 φ35.0 36.5±0.7 ≤17.5 0.95±0.15 50 18.0～34.0 φ40.0 41.5±0.7 ≤20.0 1.00±0.20 50 21.0～39.0 φ45.0 46.0±0.7 ≤22.5 1.00±0.20 25 23.0～44.0 φ50.0 51.0±0.7 ≤25.0 1.00±0.20 25 26.0～49.0 φ60.0 ≥60.0 ≤30.0 1.10±0.20 25 35.0～55.0 φ70.0 ≥70.0 ≤35.0 1.20±0.20 25 40.0～65.0 φ80.0 ≥80.0 ≤40.0 1.30±0.20 25 45.0～75.0 φ90.0 ≥90.0 ≤45.0 1.50±0.20 25 50.0～88.0 φ100 ≥100 ≤50.0 1.65±0.20 25 55.0～95.0 φ120 ≥120 ≤60.0 1.70±0.20 15 65.0～115 φ150 ≥150 ≤75.0 1.70±0.20 15 80.0～145 φ180 ≥180 ≤90.0 1.75±0.20 15 95.0～175

 Dimension( shrink ratio:3:1 ) Size Expanded Internal diameter(mm) Recovered(mm) Standard Package m/spool Internal diameter Wall thickness（Min） Φ3.2 ≥3.2 ≤1.0 0.55 ±0.15 400 Φ4.8 ≥4.8 ≤1.5 0.60 ±0.15 200 Φ6.4 ≥6.4 ≤2.0 0.65 ±0.15 100 Φ9.5 ≥9.5 ≤3.0 0.75 ±0.15 50 Φ12.7 ≥12.7 ≤4.0 0.75 ±0.20 50 Φ19.1 ≥19.1 ≤6.0 0.85 ±0.20 50 Φ25.4 ≥25.4 ≤8.0 1.00 ±0.20 50 Φ39.0 ≥39.0 ≤13.0 1.50 ±0.20 50