YAMAHA YSH20 SMTpart

34 97 98 96 95 94 93 2836 35 28 91 92 21 90 89 B 88 B 87 for each board. When wishing to correct a narrow-pitch pattern in particular, use this mode. Points A and B → .θ, The deviation in θ direction is corrected. Points Pa (Pb) →.x and .y, The deviation in X and Y direction is corrected.

86 85 84 83 82 81 .y) of point A is corrected; .θ is not. This mode is effective when it is not required to correct the deviation in θ direction; it also reduces the overall tact time.

80 79 78 77 C 76 C 75 74 73 72 71 70 69 68 67 66 65 64 119576 RAIL LIFTED L/R LOOM 1 D WARNING-SHARP EDGE 61 62 63 117320 117375 129086 BRACKET 2 WAY BRACKET 4 WAY OPTO MTG BRACKET 1 1 2 D 60 109239 SUNX PHOTO SENSOR 2 59 58 57 Page 1-15 56 55 54 53 52 51 E 50 E 49 48 47 700654 SHIM WASHER 2 46 129141 RAIL WEAR INSERT LH 1 45 129140 RAIL WEAR INSERT RH 1 44 G3121 ’O’RING 4 43 G1409 CIRCLIP (D1400/5) 2 42 41 G1414 CIRCLIP (D1400/15) 12 40 E0506 P’CLIP (CV5) 13 39 E0505 P’CLIP (CV3) 40 38 B0059 BEARING 4 F 37 140505 BEARING 4 F 36 119792 BOARD AT LEFT LOOM 1 35 119791 BOARD AT RIGHT LOOM 1 34 119591 BOARD L/R FLEX LOOM 1 33 129107 S/ABSORBER MTG BRK 2 32 119874 RAIL SUPPORT WEB RH 1 31 133155 MID RAIL R.H.

1 30 133154 MID RAIL L.H.

1 29 119497 F’RAIL SUPPORT WEB LH 1 28 117324 BRACKET 3 WAY 2 27 117320 BRACKET 2 WAY 1 26 G 24 25 112762 140496 MOTOR BRACKET SPINDLE 2 1 G 23 112377 MOTOR SPACER 1 62 64 61 22 112237 STOP ANVIL 4 21 112019 SENSOR SPACER 2 20 107866 PULLEY SPINDLE 2 19 107424 RAIL GUIDE BAR 6 18 107422 CYLINDER CONNECTOR 4 17 107409 SPACER 2 16 107371 GUIDE BAR STOP 6 15 133192 MAIN RAIL FRONT 1 14 119203 RAIL CLAMP ASSY 1 NOTES 13 117424 TUBING 4.0 O/D 1 H 1 PARTS LIST IS REPEATED ON BOTH SHEETS 12 107843 TEE FITTING 3 H 2 PARTS ARE ONLY CALLED UP ONCE 11 107316 CYLINDER (UKC 564) 4