Wheel Loader 40Y

Features Engine Model WD6114ZG9B Type Water-cooled, I-arrangement, direct injection, turbocharger, 4stroke diesel engine Number of cylinder 6 Bore’s stroke 114 X 135mm Displacement 8.27L Rated power 125KW Rated turn speed 2200r/min Max. torque Fuel consumption 226g/Kw.h Governor Centrifugal, all speed governor Cooling system Forced circulation by centrifugal pumo, pusher type fan Driving system Torque converter Type Double Turbine Torque ratio 4 Transmission Type Planetary type, clutch with multiple discs, full power shift, force to lubricate Pressure of transmission 1.1~1.5Mpa Driving axle Major speed reducer Type Spiral bevel,1-stage reduction Speed ratio 5.286 Speed reduction on wheel Type 1-stage planetary reduction Speed ratio 3.667 Speed (km/h) Gear 1 Gear2 Forward 0-10 0-35 Reverse 0-13 Steering Type Articulated frame, full hydraulic power with flow amplified System, full-flow filtering Steering angle ()35° Setting pressure 12Mpa Flow 134.4L/ Brake Driving brake Caliper discs, air-hydraulic actuated on all four wheel Parking brake Shoes-brake, applied by manual/air control Emergent brake Using parking brake, applied by air pressure control Maximum oil pressure 12.3Mpa Air pressure 0.71-0.784Mpa Hydraulic system Working pump CBG3140 or CBGJ3140 Displacement of working pump 140ml/r Control valve FPT32 Type Double valve Setting pressure 16.0Mpa Hydraulic cycle tirn(s) Raise Dump Lower9empty, float down) Total 5.9 2.0 3.0 10.9 ZL50C with fork or side bucket Specifications fork Side bucket Overall length 7378mm 7195mm Overall width 2470mm 2700mm Overall height 3337mm 3337mm Dump height 2650mm Obverse dump:2640mm Side dump:3930mm Dump reach 1430mm Obverse dump:1110mm Rated load 4000kg 3600kg Bucket diameter 1.8m² Clipping diameter 850mm(log fork)/320mm(pipe fork) Operating weight 14500kg 14500kg Equipment standard optional D6114ZG9B Rock bucket Liugong transmission Log fork Air conditioner Pipe fork 2.2m³ General bucket 2.6m³ light material bucket Liugong Axles Side-dump material bucket General cab 23.5-25 tyres Specifications Dimensions with Bucket A:Height to top of cab and canopy 3337mm B:Ground clearance 448mm C:Machine center point to rear axle 1850mm D:Wheelbase 2750mm E:Overall length 7034mm F:Maximum rollback at full height 58.5º G:Bucket dump at full height 45º H:Dump reach 1000mm J:Hinge pin height at full lift 3915mm K:Dump height 2810mm L:Maximum rollback at ground 43º M:Hinge pin height at carry position 400mm N:Maximum digging depth 40mm O:Width over tires 2470mm P:Tread width 1900mm Q:Turning radius outside tires 5446mm R:Maximum steering angle(each side) 35º S:Bucket width 2706mm T:Turning radius outside bucket 6530 mm