Wheel Loader 30V

Features Engine Model YC6108G Type Water-cooled, I-arrangement, direct Injection, 4-stroke diesel engine Water-cooled, I-arrangement, direct Injection, 4-stroke diesel engine Number of cylinder 6 6 Bore x stroke 108 x 125mm 105 x 125mm Displacement 6.87l 6.49L Rated power 92KW(125hp) 92KW(125hp) Rated turn speed 2200rpm 2200rpm Max. torque 463n.m/1400rpm 460n.m/1500rpm Fuel consumption 235g/kW.h 235g/kW.h Governor Centrifugal, all speed governor Cooling system Forced circulation by centrifugal pump, pusher type fan Speed(km/h) Gear 1 Gear 2 Forward 0-10 0-33 Reverse 0-13 Driving system Torque converter Type Double Turbine Torque ratio 4.1 transmission Type Planetary type, clutch with multiple discs, Full power shift, force to lubricate Pressure of transmission 1.1-1.5Mpa Driving axle Major speed reducer Type Spiral bevel, 1-stage reduction Speed ratio 5.286 Speed reduction on wheel Type 1-stage planetary reduction Speed ratio 3.667 Steering Type Articulated frame, full hydraulic power system, fullflow filtering Setting angle ()40° Setting pressure 14Mpa Flow 106L/ Brake Driving brake Caliper discs, air-hydraulic actuated on all four wheel Parking brake Shoe-braker, applied by manual/air control Emergent brake Using parking brake, applied by air pressure control Maximum oil presuure 12Mpa Ail pressure 0.71-0.784 Hydraulic system Working pump CBG3100 Displacement of working pump 205L/min Control valve FPF32 Type Double valve Setting pressure 16.0Mpa Hydraulic cycle tirne(s) Raise Dump Lower(empty, float down) Total 5.0 1.2 2.5 8.7 Coolant 35L Fuel tank 150L Crankcase 15L Torque converter/transmission 45L Front axle 18L Rear axle 18L Hydraulic tank 150L Brake system 2L Specifications A: Height to top of cab and canopy 3225mm B: Ground clearance 325mm C: Machine center point to rear axle 1570mm D: Wheelbase 2870mm E: Overall length 6703mm F: Maximum rollback at full height 60° G: Bucket dump at full height 45° H: Dump reach 1055mm I: Maximum overall height 4588mm J: Hinge pin height at full lift 3721mm K: Dump height 2911mm L: Maximum rollback at ground 45° M: Hinge pin height at carry position 240mm O: Width over tires 2300mm P: Tread width 1850mm Q: Turning radius outside tires 5150mm R: Maximum steering angle(each side) 40° S: Bucket width 2456mm T: Turning radius outside bucket 5672mm