Wet Wire Drawing Machine

Compared with straight line wire drawing machine, wet wire drawing machine has two notable characteristics. First, in the drawing process, there are varying degrees of relative sliding between the drawing wire and the spool (except finished spool).

Second, when the wet wire drawing machine is in operation, wire, spool and wire drawing die are immersed in or be sprayed by cooling lubricating fluid. Wet wire drawing machine has a broad market for its compact structure, small footprint and high drawing-intensive as well as no torsion in its running time.

It is well suited for high speed drawing for good conditions of cooling and lubricating of drawing wires. While in the drawing process, the relative sliding of drawing wire and the surface of spool consumes much power and abrasive wear of spool surface.

Owing to the structure restriction of this wire drawing machine, it is more suitable for drawing wires of smaller diameters. Wet wire drawing machine is available for drawing mild steel, carbon steel, stainless steel, copper, aluminum and alloys. Sever types of wet wire drawing machines are provided and each of them has its own features.

You can select the right one according to your particular conditions.

25 Dies wet wire drawing machine Turnover type wet wire drawing machine High-speed wet wire drawing machine 25 Dies wet wire drawing machine Main technical parameters: Inlet diameter: �� 0.9-2.0mm Inlet strength: 1350MPa Outlet diameter: �� 0.15-0.41mm drawing passes: 25; average unit pressure: 13% Max drawing speed: 25m / s Motor power: tank - 37KW AC inverter motor and spool - 5.5KW Cone pulley: monolithic assembly, surface coating - tungsten carbide , HRC58-62 Transmission Type: synchronous belt Application Available for mild, medium and high carbon steel.

Turnover type wet wire drawing machine Applied in drawing rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.

Technical parameters: Item LT21/275 LT23/280 LT25/230 Drawing drafts 21drafts 23drafts 25drafts Max.inlet diameter ��1.80mm ��1.50mm ��1.50mm Min.outlet diameter ��0.25mm ��0.10mm ��0.10mm Drawing speed 20m/s 20m/s 20m/s Motor power 22KW 18.5-30KW 18.5-30KW Inlet wire tensile strength ��1250Mpa Transmission mode Timing belt, AC frequency inverter control speed Capstan production chart Supersonic spray with WC, service life: 22000 hours Cooling system Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing.

Tensile strength system Consist with tight and loose pulley, tensile cylinder is adjustable. Arrange wire device Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire. Steel wire linearity Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable.

Take up mode I-spooler take-up Control mode AC frequency invert + PLC + man-machine interface + constant, complete digital logic control Drawing materials Rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.

High-speed wet wire drawing machine Characteristics: Innovation design and rational manufacturing process insures no leak in 3 years. Box type welding machine structure, safety and beauty, insure high speed drawing reliable and stable. Complete digital logic control, man-machine communication, status display, information service, etc.

Tension spooling and meter precision make steel wire better linearity. Special design and control, satisfied with all kinds of I-spooler take up wire.

Parameters: Item LT17/350 LT17/300 LT19/250 LT25/200 Drawing drafts 1 + 17drafts 1 + 17drafts 1 + 19drafts 25drafts Max.inlet wire diameter ��3.5mm ��3.0mm ��2.2mm ��1.00mm Min.outlet wire diameter ��0.8mm ��0.65mm ��0.3mm ��0.10mm Drawing speed 10m/s 12m/s 16m/s 20m/s Motor power 6-55KW 4-55KW 22-30KW 15-22KW Inlet wire tensile strength ��1250Mpa Transmission mode Timing belt and powerful narrow belt, AC frequency inverter control speed Capstan production chart Supersonic spray with WC, axiality��0.025 using life 22000 hour.

Cooling system Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing. Tensile strength system Consist with tight and loose pulley, tensile cylinder is adjustable, and assemble double color protect cover.

Arrange wire device Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire. Steel wire linearity Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable, slove twisting problem.

Take up mode I-spooler take up Control mode AC frequency invert + PLC + man machine interface + constant, complete digital logic control