Volt/mA Calibrator YHS-715

Delivery Time:According to customers' need.
Certification:CE
Volt/mA Calibrator  YHS-715

YHS715 Volt/mA Calibrator is a source and measurementtool. This Calibrator can be used in measurement or output 0 to 24 mA DCcurrent loop, and0 to 10 V DCvoltage.

Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution Measure voltage output process signals from PLCs, transmitters Source or simulate24 mA loop current Source voltage to 100 mV or 10V 24V loop supply with simultaneous current measurement Enhanced voltage and current measure and source accuracy Improved battery life 250 ohm HART resistor with loop power Holster features test lead storage Compatible with toolpack magnetic hanging system Step and linear ramp output function Configurable zero and span settings Functional specifications

Measure / Source mV	Range:	0 to 100 mV
	Resolution:	0.01 mV
	Accuracy:	0.02% + 2 counts
Measure / Source V	Range:	0 to 10 V
	Resolution:	0.001 V
	Accuracy:	0.02% + 2 counts
Measure / Source/ Simulate mA (% of span)	Range:	0 to 24 mA (-25% to 125%)
	Resolution:	0.001 mA
	Accuracy:	0.015% + 4 counts
	Note: Sink (simulate transmitter) Display mA or % of span

    Specifications

LoopPower	Range:	24 V dc
	Accuracy:	10%
	Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V
Display	Clear 5 digit LCD

Mechanical & General Specifications

Weight:	350g(include battery)
Size:	190mm× 89mm × 42mm
Battery:	9VDC, 006P or 1604