United States Biodiesel Production Beads

Specifications: These beads adsorb water and remove glycerine from fresh or used bio oil(cotton, soy, peanut, rape, etc. ) without using lye and methanol/ethanol. A 30 lb.

Container is capable of processing over 1,000,000 gallons of oil in its life time (assuming average restaurant grade deep frying oil). -*30 lbs of beads is enough to process 5000 gallons of waste oil before regeneration is required assuming the oil is not extremely contaminated. Maximum oil flow rate- For every 30 lbs.

Of beads you have in your waste oil circuit you will be able to process approximately 8 to 16 gallons per hour or 384 gallons per day maximum flow rate for new or freshly recharged( reactivated by simply oven baking them at between 325 and 350 degrees f. For a few hours or until they stop smoking) beads.

This rate may decrease as the beads get saturated with contaminants. The oil flowing out of the beads should always look clear when you have the flow rate adjusted properly. Extremely contaminated oils may need to be processed at slower flow rates!