Underfloor Heating Mat

Under Floor Heating Mat Characteristics General technical data

Self-adhesive net Cable structure----Two-way

100% covered Shape of cable----annular

Good flexing, with all length Diameter----3mm

As thin as only 4mm Cold lines----one line of four meters

100 and 150 watts/m2 both can create maximum comfort level Intensity of deformation----at least 600 Newton

One cold lines Voltage----220V(230v, 240v, customized)

10 years of warranty Insulation----TEFLON

Cover----Teflon

Shield----aluminum foil

Characteristics

1. Two double-sided adhesive tapes without liner.

2. 100 and 150 watts/m2 heat mats both can satisfy your needs.

3. Safety approved for wet locations.

4. Flexible installation.

5. Durable construction.

warranty against manufacturing defects.

Product data

Under Floor Heating Mat(double conductor 150W/M²)

power(w) Voltage(v) linear power(w) Value of resistance(Ω) Cable length(m) Square meter(length*width)

150 220 12 322.67 12.5 0.5 x 2

225 220 12 215.11 18.8 0.5 x 3

300 220 12 161.33 25.0 0.5 x 4

375 220 12 129.07 31.3 0.5 x 5

450 220 12 107.56 37.5 0.5 x 6

525 220 12 92.19 43.8 0.5 x 7

600 220 12 80.67 50.0 0.5 x 8

725 220 12 66.67 60.4 0.5 x 10

900 220 12 53.78 75.0 0.5 x 12

1050 220 12 46.1 87.5 0.5 x 14

1200 220 12 40.33 100.0 0.5 x 16

1350 220 12 35.85 112.5 0.5 x 18

1500 220 12 32.27 125.0 0.5 x 20

Jiuning Under Floor Heating Matcombines the highest comfort level with maximum energy efficiency. It's a proven technology that's safe, reliable and energy efficient(saving 30%-40% compared with traditional heating system).

Safe: High efficient and convient heating system.

Automatism: Heating system can automatically(by thermostat) measure the heating requirement, and timely adjust the temperature.

Economical: The cost of installation and operation is relatively low; our heating system can efficiently avoid damage and save maintain fees.

Eco-friendly: Our heating system use the cleanest and most efficient power which are popular between customers.

Warranty: 10 years

Installation

1) Don't damage heated floor mats.

2) Well installation can guarantee the efficiency.

3) After the installation, take a full test and make sure the system works well.

4) Heat insulation materials should be dry and the joint of cable should be sealed.

5)The junction box should be sealed to prevent water leak.

6) Protective sleeve must not be damaged during installation, and the core wire can not bare.