UPC-D Three-Phase Lighting Power Saver

Product overview: 1) All-solid-state device with MPU 2) Monitors and modulates AC sine waves continually 3) Installation of UPC-D is flexible and easy 4) High investment return rate 5) Shell has good ventilation and can adapt to the severe industrial environment 6) Power saving, improves power factor and balances the output power effectively through the unique software 7) Rated voltage: 220VAC 8) Single phase, 50/60Hz 9) Rated capacity: 16 - 250A 10) Power saving rate: up to 50% four stage adjustable 11) 99 minutes after power on (can be changed at any moment) the power saving state will be active, allowing a sufficient startup and warm-up time for light bulb and ballast 12) With green LED diagnosis indicator 13) Applicable to pure or mixed light sources such as solar lamps, high intensity discharge lamps, incandescent lamps 14) Non-phase control patent, and will not produce any high order frequency harmonic waves 15) Automatic power saving, does not require special care and maintenance 16) Long service life up to 15 years The model selection of UPC-D: 1) According to information from on-site, the appropriate product model should be selected based on different lamplight types and capacity sizes 2) For the selected model, please refer to the Table of UPC-D Product Applicable Object and Scope 3) The basic principle is: try to choose the model whose rated capacity is near to the real capacity of lamplight circuitry so as to get the best investment payback 4) Overload should be avoided, which will affect the service life of the product or even result in accidents Applicable object and scope: 1) There are various lamplight series products 2) Applicable object and scope of each product are different 3) Therefore, client must distinguish these differences when choosing products (we offer consultation) 4) The applicable object and scope of different products can be seen from the following table