UNIVERSAL 6380A SMTpart - AI Part

Feed Only
.
Clinch Down
.
Transfer Steps
.
Bad Board/Circuit Reject
.
Board/Circuit Error Correction
.

Auto Miss Mark
.
Checkgap
Index
Use the Index option to insert an index (table rotation) step in the steps list. If the number of index steps added to a product is not valid for the current workboard configuration, the product status in the Product Editor window in-dicates 'Add/Delete Index Step(s)'.
To insert an Index step:
1
Special Steps > Add > Index
The cursor is displayed as a horizontal arrow with a single footprint.
2

Steps that are not positioned after the correct index step are considered invalid and are displayed in red in the list. When these steps become valid (by adding index steps, changing dispense head assignments, etc.) they are then displayed in black.
Index to Transfer
Use the Index to Transfer option to insert an Index to Transfer step. An In-dex to Transfer step causes the rotary table(s) to move to the 9 x 17 inch po-sition and index the required number of times to return to the transfer (or home) position. This eliminates having to determine how many Index steps to add to the product. Typically, an Index to Transfer step is added just in front of the final park step. This step is not required if the machine is config-ured with board handling because the final park automatically causes an in-dex transfer.
To insert an Index to Transfer step:
1
Special Steps > Add > Index to Transfer
The index to transfer step is inserted in the list as the last step before
the park step. The index to transfer step is displayed in green.
Park
Use the Park option to insert a park step. A park step causes the X-Y table to move to a programmed location known as the park position. The Product Editor automatically places a park step at the end of the pattern. However, intermediate park steps can be added elsewhere in the pattern. For machines that are configured with board handling, the final park step causes the rotary table(s) to index the correct number of times to return to the transfer (home) position.

If the last step is not a park or index to transfer step, the product status in the Product Editor window indicates 'Add Final Park/Transfer Step'.
To insert a Park step:
1
Special Steps > Add > Park
The cursor is displayed as a horizontal arrow with a single footprint.
2
Feed-Only
Axial machines only. Use the Feed-Only option to insert a component feed step into the pattern. A Feed-Only step causes the head pitch wheels to index one position. This allows large components that occupy more than one space on the component feed wheel or check gaps to be programmed.
To insert a Feed-Only step:
1

Special Steps > Add > Feed-Only
The cursor is displayed as a horizontal arrow with a single footprint.
2
Clinch Down
Radial machines only. Use the Clinch Down option to insert a clinch down step into the pattern. A Clinch Down step causes the clinch to lower to pre-vent interference with table moves.
To insert a Clinch Down step:
1
Special Steps > Add > Clinch Down
The cursor is displayed as a horizontal arrow with a single footprint.
2