Turbocharger Speed Sensor is a Sensors product. Key specs — Origin: Singapore.
Product Description
Model No.
Product Origin
Brand Name
Price Terms
Payment Terms
Certification Description:HORNEL Inductive pulse sensor for harsh environment, model this type of sensor objects like gear wheels, punched discs or integral shafts made of steel can be sensed. They consist of a magnet and a coil wound round a iron rod, where a voltage which frequency is proportional to the speed is indusced by changing the air gap between object and sensor tip. This measuring principla allows the operation at temperatures up to 110 degree C (Type FGL 1/2).The Output voltage of the inductive sensor is highly dependent on the speed respectively peripheral speed of the ferromagnetic gear wheel, the form of teeth (module) and the gear-to-sensor distance. Please note in general when sensing a lower peripheral speed of 15 rpm on a gear with 60 teeth, module 2, a distance of s = 0.5mm may not be exceeded. The gear-to-sensor distance must be reduced at a lower peripheral speed and if the conditions are reversed it can be increased. This relationship can be approximated within a range s= 0.4..1.0mm and M = 2 to 4 by the equation:F = n. Z/60N = lower speed limit of the measuring range in rpmZ = number of teeth on the sensed gear wheelPlease contact us for your requirement. The equipment is made in Germany by our principal, Dr. E. Horn GmbH.
