Thermoplastic Spraying Road Marking Machineries

1.Engine：Original imported Honda or Robin 20Hp air-cooled gasoline engine.

2.Driving system:The orginal imported variable speed transmission system with automatic brake device,which can be freely operated to forward,back off or stop (HTS);The left and right wheels with differential driving device make the curve driving and turning flexible and manual brake system makes the running safer.

3.Driving speed :Forward:0-22km/m;back off :0-3km/h. climbing capability: 15°. 5.Micro-electronic control system:This system has four-type marking ways(also can makes personality design according to the standard of customer).Spray gun controller can freely change the guns between the single and double spray guns.

6.Chassis:Firm welding frame,and surface has been chrome-plated ,galvanizated or sprayed coaating with corrosion resistance,equip with high speed type imported bearing to ensure the whole machine lighter and more convenient. 7.Rubber wheel :The left,right ,front and back wheels are gas-filled pressure resistance vacuum ones,the diameter is ?400mm.

8.Guide rod:The guide rod is easy to operate,which can be freely adjusted to up,down,left and right. 9.Illumination and alarming function:install with high intensity illumination lamp,which makes the work at night alarming lamp with adjustable flicker frequency greatly improves the safety of work at night .

10.Paint pump:Equip with single hydraulic piston high pressure airless pump,which makes sure the big flow and stable pressure .Max pressure 20Mpa(Working pressure 10-15Mpa).Max flow:20L/min. 11.Paint tank:The capacity is 65L.There is sieve in the tank.

12.Spray gun:Equip with three new type pneumatic spray guns and one hand spray gun with lengthening pipe for spraying special sign like arrow and side columnar reverse wastewater nozzle (30/20)makes the on-spot discharging easy and non-arc nozzle ensures the base line collimated.

13.Available paint:for the spraying of cold solvent,water based road marking paint. 14.Spraying width:100-450mm. 15.Glass beads Sprayer: The parameters are the same as that of TT-DRZ-I.

16.Glass beads bin:Bin with windows can check the quantity of the glass beads in capacity is 25kg. can finish the pre-marking synchronous with marking line,which improve efficiency double times. 18.Total Size: Weight: 1880 mm*Length*740 mm*width1650 mm*Height.564kg. Note:option for special trailer chassis,convenience for transportation.

Option for portable hand-push road marking machine to mark special marking,such as pedestrain,parking and lane marking.