Thermal Printer with Cutter C2

1. With set cutter/half cutter, scissors type paper cutting, with hard-wearing cutter 2. Very silent printing thru direct thermal printing method 3. High speed (62.5mm/sec, based on character ratio 1/6) 4. Paper end sensors function and self-motion memory printing function 5. Support 9V-24V power 6. Serial (RS-232, TTL) interface/Parallel interface 7.

Abundant figure/curves/characters print function 8. Add coordinate curve printing function 9.

Easier paper loading (key ejecting type) Item Specification Printing method Direct thermal line printing Paper out detection paper end sensors function Paper loading way easy paper loading Paper width 57 mm Print width 48 mm Resolution ration 8 dots/mm(384 dots/line) Life of printing head 6×106 character lines Printing speed 65mm/sec(when the character ratio is 25%.) Character size 6x8dots , 8x16dots,or12x24dots Chinese character library GB2312,16x16dots,or24x24dots Outline dimension(WxHxD mm) 168mmx132mmx65mm Installation dimension(WxH mm) 106mmx140mm / 114.5mmx150mm Inlaid deepness 55mm/58mm Paper supplied Thermal roll paper (57mm wide, 50mmø) Interface Serial(RS-232C, TTL)/Parallel interface Input Power DC 9V-24V, 25W Operating temperature 5°C ~ 50°C Storage temperature -20°C ~ 60°C Operating humidity 10°C ~ 80°C Storage humidity 10°C ~ 90°C