Tension table (mechanical, 5KN)

To measure the cars, trains, ships and other hauling equipment and machinery, the traction ropes, each tension meter measurements from 1 / 10 scale to the limit range.Limit load (KN) 5Min.

Div (KN) 0.1Overall dimension: L * W * H (mm) 402 * 268 * 162mass (kg) 7Package 14Third, the accuracy level and tolerancean accuracy tolerance of 1% (full scale), two precision tolerance of 2% (full scale).Fourth, the use of 1, the needle before use should be made ​​active (black pointer) to align the zero line, the adjustment method; rotation in the outer shell knob to zero the lower side, in addition, the needle should be passive (red pointer) and active pin overlap.Adjustment method: rotating table in the center of the glass knobs can be reset.2, payload ban over the limit load, otherwise it will damage the tension meter.3, the force gauge against disassemble parts, to avoid affecting the tension meter accuracy.4, using the pull timing impact or fall against, the slow loading and unloading load should be smooth, dry place after use to prevent moisture.