Standards: GB9770-88, MT147, MT668, DIN22131, JISK6369, AS1333 etc.
Structure: The belt core is comprised of longitudinally and evenly arranged non-spinning galvanized wire ropes and high adhesive core rubber, with the upper side and lower side covered with rubber layer.
Features: High tensile strength, long service life, short elongation under service, good groove formation property and good anti-flexure property, suitable for conveying materials across long distance, with large volume and high speed.
Types: According to structure: General type, Impact resistance and Rip resistance transverse type. According to application: besides General-used steel cord belt, there are some kinds of Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, High-grade type and etc.
Model: ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST3500,ST4000,ST4500,ST5000,ST5400.

1) Technical Data For Steel Cord Conveyor Belt According to DIN22131

	ST1000	ST1250	ST1600	ST2000	ST2500	ST3150	ST3500	ST4000	ST4500	ST5000	ST5400
Longitudinal Tensile Strength (N/mm)	1000	1250	1600	2000	2500	3150	3500	4000	4500	5000	5400
Steel diameter(mm)	4.1	4.9	5.6	5.6	7.2	8.1	8.6	8.9	9.7	10.9	11.3
Space length Between Cords (mm)	12	14	15	12	15	15	15	15	16	17	17
Min. Cover Thickness	4	4	4	4	5	5.5	6	6.5	7	7.5	8
Width item (mm)	Steel cords Number
500	39	34
650	51	44	40	51	40	40	40	40	37
800	64	55	50	64	50	50	50	50	46	43	43
1000	81	69	64	81	64	64	64	64	59	55	55
1200	97	84	77	97	77	77	77	77	71	66	66
1400	114	98	90	114	90	90	90	90	84	78	78
1600	131	112	104	131	104	104	104	104	96	90	90
1800	147	127	117	147	117	117	117	117	109	102	102
2000	164	141	130	164	130	130	130	130	121	113	113
2200	181	155	144	181	144	144	144	144	134	125	125
2400	197	169	157	197	157	157	157	157	146	137	137
2600	214	184	170	214	170	170	170	170	159	149	149
2800	231	198	170	214	170	170	170	170	159	149	149
3000	247	212	197	247	197	197	197	197	184	172	172
3200	264	227	210	264	210	210	210	210	196	184	184

Note: The length of single roll of conveyor belt is 100m-1500m, depending on its thickness, width, transportation and installation conditions. The length shall be determined through discussion of supplier and buyer.

2) Cover rubber property and grades:

Test items		Property indexes
		GB9770-2001				DIN22131
		D	H	L	P	W	X	Y
Tensile strength	Mpa â‰¥	18	25	20	14	18	25	20
Elongation at break	% â‰¥	400	450	400	350	400	450	400
Aging test (70â„ƒã€7D) change rate of tensile strength	%	-25ï½ž+25	-25ï½ž+25	-25ï½ž+25	-25ï½ž+25	-25ï½ž+25	-25ï½ž+25	-25ï½ž+25
Abrasion	â‰¤	90MM3	120MM3	150MM3	200MM3	90MM3	120MM3	150mm3

3) Min. Pulley Diameter:

Type	St1000	St1250	St1600	St2000	St2500	St3150	St3500	St4000	St4500	St5000	St5400
Min.Pulley Diameter	630	800	1000	1000	1250	1400	1500	1600	1600	1800	1800

4) According to standards:

Type	According to Standards
Ultra-high abrasion resistant	Shore abrasionâ‰¤70mm3
High abrasion resistant	AS1333 A,DIN22131 W, GB9770 D
Impact and abrasion resistant	DIN22131 X Y, AS1333 M N, JIS K6369 D H,GB/T9770 H L
Heat resistant	ISO 4195,HG/T2297,GB/T20021
Flame resistant & Anti static general use	DIN 22131 K
Flame resistant & Anti static for coal mine use	MT 668, MT147, AS1333 F
Oil resistant	HG/T3714
Acid/alkali resistant	HG/T3782
Cold resistant	HG/T3647
Ozone resistant	RMA (ASTM D1171)

Steel Cord Conveyor Belt

Specifications

Product Description

Related Products