Rubber Mixing Machine

Rubber Mixing Mill

This Rubber Mixing Mill is mainly applicable for plasticing, warming and mixing rubber. This machine with overturning equipment for rubber.

1. The roll is made of cold hard cast iron LTG-H, whose surface rigidity is HS68-75.There are three types of roll, such as cored smooth roll, cored fluted roll, circumferentially drilled smooth roll. The roll adopts double auto-centering rolling bearings, which are lubricated by lubrication grease.

2. The reducer has hard tooth surface. All the drive gears of reducer are concentrated inside the case, which is well lubricating with spray type and has long useful life.

3. PLC control method

XK-160 XK-230 XK-250 XK-300 XK-360 XK-400 XK-450 XK-560 XK-550B XK-660 Working Diameter of rolls (mm) 160 230 250 300 360 400 450 560/510 550 660 Working Length of Rolls (mm) 320 600 620 750 900 1000 1200 1530 1500 2130 Front Roll Surface Speed (m/min) 8.95 10.21 14.1 15.1 16.25 18.65 24.26 27.72 27.94 28.6 Refraction ratio 1:1.35 1:1.19 1:1.17 1:1.25 1:1.25 1:1.271:1.27 1:1.2 1:1.22 1:1.24 1:1.09 Max. nip (mm) 4.5 7 8 10 10 10 15 15 15 15 Capacity per Batch(kg) 1-2 6-10 8~15 15~20 20~25 18-35 25-50 35~50 50~60 165 Motor Power (kw) 5.5 15 18.5 22 30 37 55 90 110 245 Dimensions: (mm) L 1380 2800 3400 3400 3780 4350 5200 5845 5870 7465 W 860 1200 1500 1500 1850 1850 2380 2284 2475 3662 H 1320 1120 1500 1550 1750 1785 1840 1978 2045 2080