Rod Mill

Feed Size: ≤25 - ≤50 mm

Processing Capacity: 0.62 - 180 t/h

Processible Materials: All kinds of minerals and other materials.

Application Range: Metallurgy, mining, chemical engineering, coal, refractory matter and ceramic production.

Rod Grinding Mill Features

1. Grinding media can contact with the ore in a line way in the grinding process. Therefore, the pin crusher can grind materials selectively

2. The particle size is relatively uniform and there are few over-crushed particles.

3. The processing capacity of rod mill or rod grinding machine is bigger than that of ball mill for the coarse crushing.

Rod Mill

Rod Grinding Mill Introduction

Rod mill (other names: rod grinder, rod grinding machine, rod grinding mill or grinding rod mill) can be divided into dry type rod mill and wet type rod mill. Fote rod grinder uses advanced technology of controlled feeding and discharging, and changes the traditional surface contact into line contact so that the discharging size is more even and the yield is higher.

The rod grinding mill is widely used in industries such as refractory, chemical industry, metallurgy, glass and other industries with high requirement on the uniformity of finished materials.

Rod mill (other names: rod grinder, rod grinding machine, rod grinding mill or grinding rod mill) can be divided into dry type rod mill and wet type rod mill. Fote rod grinder uses advanced technology of controlled feeding and discharging, and changes the traditional surface contact into line contact so that the discharging size is more even and the yield is higher.

The rod grinding mill is widely used in industries such as refractory, chemical industry, metallurgy, glass and other industries with high requirement on the uniformity of finished materials.

Rod Mill

Rod Gringind Mill Working Principle

The electro motor drives the cylinder to rotate through the reduction gears and the peripheral rack wheel reducer transmission, or the low speed synchronous motor directly drives the cylinder to rotate through the peripheral rack wheel reducer transmission. Inside the cylinder, there are proper ore grinding media-steel rod. Under the eccentric force and frictional force, the ore grinding media are lifted to a certain height and fall down in the state of dropping. The materials to be ground continuously go into the cylinder from the ore feeding mouth and are crushed by the moving grinding media, and then are discharged by the overflow and the force of continuous feeding to go to the next procedure.

Technical Datas of Rod Mill

Model Shell Specifications （mm） Shell rotation speed

（r/min） Feeding size

(mm) Discharging size

(mm) Processing capacity

(t/h) Power

(kw) Total weight

(kg)

Diameter Length

MBS0918 900 1800 36-38 ≤25 0.833-0.147 0.62-3.2 18.5 5500

MBS0924 900 2400 36 ≤25 0.833-0.147 0.81-4.3 22 6100

MBS1224 1200 2400 36 ≤25 0.833-0.147 1.1-4.9 30 12000

MBS1530 1500 3000 29.7 ≤25 0.833-0.147 2.4-7.5 75 16800

MBS1830 1830 3000 25.4 ≤25 0.833-0.147 4.8-11.6 130 29000

MBS2130 2100 3000 23.7 ≤25 0.833-0.147 14-35 155 34800

MBS2136 2100 3600 23.7 ≤25 0.833-0.147 19-43 180 37000

MBS2430 2400 3000 21 ≤50 0.833-0.147 25-65 245 54000

MBS2736 2700 3600 20.7 ≤50 0.833-0.147 32-86 380 86000

MBS2740 2700 4000 20.7 ≤50 0.833-0.147 32-92 400 94000

MBS3245 3200 4500 18 ≤50 0.833-0.147 64-180 630 137000