Reconditioned Tile Adhesive

Features:1, this product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material 2, the indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board 3, can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface4, excellent flexibility, can bear the bonding layer stretch that caused by temperature5, good anti-infiltration function6, no need to wet the brick wall, effectively improve the efficiencySurface Treatment:1, the substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.2, for the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive.

Specific reference, please look at the MB-03 introductionOperation Process:1, using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m22, push the ceramic tile or heavy type ceramic tile above it3, for the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material4, can be used for the old ceramic tile re-treadCautions:1, never mix the dry slurry with water and use again2, for the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation3, for the painting surface, make sure the initial bond strength and no flake4, operating under 5℃~40℃ situation5, clean the surface by little wet sponge or cloth before it dry6, leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap fillerTechnical Reference:Coverage area(amount) Technical reference

using 3*3mm tooth scraper about 1.7kg/m2 1, adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)

using 6*6mm tooth scraper about 3.0kg/m2 2, cool time: about 10min (cool time: the longest cool time that the adhesive can last )

using 10*10mm tooth scraper about 4.5kg/m2 3, dry time: 24h (according to the weather)

4, water resistance: excellent; non-toxic, prevent fire

the smoother the surface, the less amount 5, when dry, anti-weak acid, anti-strong alkali and oil resistance

6, cut degree: >1.2MPa (14days later)

Store Method:Store in cool and dry place, unopened product can be saved for one year.Packing:2kg/bag, 25kg/bag