Raymond Mill

1. Application: Raymond Mill is used to grind materials in the fields of building materials, mining, metallurgy and chemical industry.

The materials must be non-flammable and non-explosive materials such as: limestone, calcite, barite, dolomite, potassium feldspar, marble, talcum, gypsum, kaoline, medical stone, rock phosphate, manganese ore, iron ore, glass, ceram, active carbon, carbon black, fireproof materials, heat preservation materials, chemical materials and so on(300 kinds of materials).

2.Advantages of our Raymond mill: 1.Low investment cost and high yield 2.Easy to oprate and maintain 3.About 30 years experience 4.Simple structure & easy operation 5.High Productivity 6.Low power consumption 7.Long service life

3. Raymond mill working process If the materials are crushed to the required size, the materials will be sent to hoist storage hopper, and then will feed into the host mill room uniformly continuously through feeder .

Due to the centrifugal force generated by the rotation, the roller swings outward, pressed on the grinding ring, and shovel blade materials to the place between the roller and grinding ring. Owing to the rolling of mill roll,the purpose of smashing are achieved.

The powder material after grinding will be brought into the analysis machine with the circulating air of blower for sorting.While the material whose fine is coarse regrinds, qualified powder gets into the finished product cyclone powder collector with the air and through a powder discharge pipe, the process is finished.

In the grinding room,because of the water in the gringing material, grinding heat, moisture evaporation, and as the whole of the pipe joints are not tight, the outside air is inhaled so that the cycle pressure is increased to ensure the mill to work in a vacuum state.

The increased gas flow through the wind pipe into the dust collector , discharges into the atmosphere after purification.