RYMAX Fiber Cement Board

RYMAX Fiber Cement Board RYMAX Fiber Cement Board is a new kind partition board for high quality buildings. It is compounded of patella cement, silver sand, porcelain granule, with fiberglass mash reinforced. With the structure like cement wall, fiber cement board has excellent stability and durability.

It is widely used for interior and exterior partition in Europe, America and Japan. Installation of fiber cement board is the same as other light partition board (plaster board, etc.).

With its innovative dual sides design, the board can be fixed with ceramic tile, stone board or glass on its rough side; while its smooth side can be fixed with wallpaper or be painted. It is ideal for high class residential building, high-tech factory, shopping mall, restaurant and hotel, etc.

Performance: Physical Property (8mm board): Item Test Result Standard Density 1.20g/cm3 GB/T 7019-1997 Flexural Strength In Dry Condition 11MPa GB/T 7019-1997 Flexural strength in water saturation condition 10MPa GB/T 7019-1997 Bulking Factor 0.2% JC688-2006 Formaldehyde Release <0.1mg/L(Qualified) GB 18580-2001 Activity Coefficient Qualified(Non Radioactive Substance) GB6566-2001 Combustibility A1Level GB/T 5464-1999 Moisture Absorption 0.12% GA 160-2004 Impermeability no water drop at the bottom GA 160-2004 Contract With Dry Rate 0.1% JC688-2006 Thermal Conductivity 0.117kca/mhC JC/T5641-2008 Installation: Cutting and using fiber cement board is as same as using calcium silicate board.

Fix the board on the keel with self tapping screws, followed by putting joint mixture to seal the gap. If used in moist environment, such as bath room, waterproofing should be reinforced. Features: * Excellent Waterproof property: Besides its fireproof performance, RYMAX Fiber Cement Board is also 100% waterproof.

In contrast, when in touch with water many other boards will be damaged and decayed because of their interior structure destruction. Fiber cement board even can be used as complete waterproofing material. In an experiment, a water tank made of fiber cement board was filled with 200kg water, and lasted for 120 days without leakage.

It’s waterproof performance was also proved by CN313777 test. When used as wall material in bathroom construction, it is suggested that after waterproofing treatment, seal all openings and fill in water 100 centimeters in depth.

Leave the water for 30 days to confirm waterproof performance before renovation to avoid any leakage in the future. * Grade A1 Fireproof Performance: RYMAX Fiber Cement Board has been tested and granted Grade A1 by China National Center for Quality Supervision and Testing of Fir Building Materials. * Amaging Heat Insulation, Energy Saving and Environment Protection: Heat condutivity of RYMAX Fiber Cement Board is only 0.117kcal/mhC.

When used as exterior wall material or roof heat insulation material, it can effectively reduce heat radiation, and greatly increase efficiency of air conditioning system. It is ideal for energy saving architecture.