Polyethylene Catalyst is a Catalyst product. Key specs — Brand: XINSU; Origin: ZIBO,CHINA.
Product Description
| Catalyst | Activity of Catalyst (gPE/gcat，Ordinary State) | Appearance | Application Device | Application & Specialty |
TH-1 | 5000～6000 (resin bulk density: 0.38-0.40 g/cm3) | taupe | Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state. | For the production of polyethylene products like LLDPE, MDPE, HDPE |
TH-1 | 6000～7000 | taupe | Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state. | For the production of polyethylene products like LLDPE, MDPE, HDPE |
TH-1 | 7000～10000 | taupe | Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state. | For the production of polyethylene products like LLDPE, MDPE, HDPE |
TH-1L | Over 18000 | slurry | Applied for full density polyethylene equipment with UNIPOL process, operated at high load frozen state. Real time deoxidization is necessary. Different types of resin can be produced by regulating the deoxidization of catalyst. | For the production of polyethylene products like LLDPE, MDPE, HDPE |
TH-1L | Over 30000 | slurry | Applied for full density polyethylene equipment with UNIPOL process at non-frozen and frozen state, requiring no real time deoxidization. | For the production of LLDPE, MDPE, HDPE. No carrier contained in catalyst, ash content of resin can be reduced. |
TH-2 | 4500～6000 | pea green | Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process. | Producing resin with the melt flow index of 1.4～2.5g/10min, and the density of 0.948～0.955g/cm3, mainly used to mould various containers with a volume bigger than 200 liter. |
TH-2 | 4500～6000 | pea green | Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process. | Producing resin with the melt flow index of 8.0～15g/10min and the density of 0.947～0.953g/cm3, used as special materials for film. |
TH-2 | 4500～6000 | pea green | Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process. | Producing resin with the melt flow index of 8.0～17g/10min and the density of 0.939～0.948g/cm3, used to extrude products. It can be used to produce pipes conforming to PE80 and PE 100 standard. |
TH-2 | 4500～6000 | pea green | Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process. | Producing resin with the melt flow index of 12～21g/10min and the density of 0.949～0.956g/cm3, used to make containers with a volume less than 20 liter. |
TH-2 | 4500～6000 | pea green | Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process. | Producing resin with the melt flow index of 7.0～14g/10min and the density of 0.945～0.952g/cm3, used to make containers with a volume less than 100 liter. |
ã€Main Characteristics and Advantages】
(1) Performance indexes equals the level of similar imported catalyst, and key indexes are better than international level;
(2) Reliable, steady and excellent quality;
Top grade and steady civil project (from Qilu Petrochemical) provides creditable guarantee for high quality of TH series polyethylene catalyst;
Scientific and reasonable process flow, strict and careful process management, unique and strong catalyst equalization ability ensure high quality and stability of TH series polyethylene catalyst.
(3) Advantaged test base ;
with a set of small scale evaluation set,and Qilu Petrochemical pilot-plant, LLDPE/HDPE set for complete evaluation ensure high quality of TH series polyethylene catalyst.
