Polyester Insulation Batts
Specifications
- Origin
- Suzhou of China
- Price Term
- FOB
Polyester Insulation Batts is a Construction Materials Agents product. Key specs — Origin: Suzhou of China; Price Term: FOB.
Product Description
Suited for wall and ceiling cavity installation
Lightweight
Non-irritating
Non-allergenic
Environmentally friendly because uses recycled plastic bottles
Product Description:
Polyester Thermal Batts are lightweight products manufactured from thermally bonded polyester fibre, with a high percentage of recycled fibres. As well as being manufactured to comply with AS/NZS 4859.1, Polyester Thermal Batts are non-toxic and user friendly insulation, requiring no specific protective clothing. Polyester Thermal Batts will not corrode or deteriorate over time. The products are white in colour. Physical properties and material safety data can be found on the Polyester Bonded Polyester Products MSDS.
Applications:
Polyester Thermal Batts have been designed to provide a safe and efficient thermal and acoustic insulation for the Australian home owner. Polyester Thermal Batts are ideal for use in walls, ceilings and between floors and correctly installed will improve energy efficiency and reduce greenhouse gas emissions.
General Installation Advice:
Polyester Thermal Batts are safe and easy to install in the walls and ceiling. Batts are supplied in two widths to suit standard housing construction, this being 430mm widths for 450mm centres and 580mm for 600mm centres. As the batts are safe and soft, Polyester Thermal Batts are easily torn or cut with a pair of industrial scissors or shears. Off cuts can be used to fill corners crevices and gaps, eliminating any waste. For ceilings, Polyester Thermal Batts are installed by laying them on top of the ceiling between the ceiling joists. A 50mm gap should be allowed around flue pipes, ceiling fans and 200mm gap around recessed lights. For walls, the Batts are placed between the wall studs before the plasterboard is put in place. If required, lightly staple or tape insulation into position. No special clothing, gloves or masks required for installation. Allow up to one month for products subjected to compression packing to recover to nominal thickness.
