Pneumatic Piston Vibrator (FP-25-M)

Features: 1, any direction in space installation. 2, throttle valve in the pipe along the road could be FM. 3, easy to use, you can simply use a snorkel. 4, vibration force big. 5, long life.

6, made of two kinds of carbon steel and stainless steel.Structure and principle: Open the two three solenoid valves (often pass or always closed), high-pressure gas through the channel 5 into the cavity under the piston shown in Figure 1. Push up the piston, the piston chamber gas is squeezed through the exhaust vent.

When the piston up to the finish line, gas tank and airway through automatic reversing the gas into the piston chamber. Shown in Figure 2. High-pressure gas pressure piston-to-end downstream end of the first cycle, second cycle began, followed by constant cycle back and forth to generate translational exciter and shaking, resulting in vibration force.

Low-pressure area is created at both ends of the piston back pressure, so instead of oscillator is a compressed air powered drive stainless steel or wheel spin to produce a certain frequency of excitation, so that the parts carried by vibration, to achieve the effect of agitation and uniform mixing.