Penetrating Coating Ultrasonic Thickness Gauge

UM-1D Penetrating Coating Ultrasonic Thickness Gauge

Standard package

UM-1D thickness gauge

Standard probe (PT-08)

Carrying case

Two 1.5V AA alkaline batteries

Couplant

Operating manual

Certification of quality

Packaging list

Operating principle Standard mode: P-E (pulse-echo) method with dual-element probes

Coating mode: E-E (echo-echo) method with dual-element probes

Probe zero adjustment

Selectable 1-point calibration: normal measurement

2-point calibration: curve surface measurement or other special application with a high precision

V-path correction

Automatic

Measuring range

0.8mm to 300mm; 0.031in to 11.81in in standard mode

3.0mm to 18.0mm; 0.118in to 0.709in in through coating mode

Depending on probe, material and surface condition

Digital resolution

0.001in or 0.1mm

Units Selectable: inch or mm

Display

128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm)

EL backlight and switchable contract ratio

Digit height: 0.54in or 13.75mm

Measurement update rate

4 Hz in standard measurement mode

25 Hz in MIN capture mode

Material velocity range

1000 to 9999 m/s; 0.039 to 0.394 inch/μs

Power

Two 1.5V AA alkaline batteries

Warning with low battery voltage

Operating time

Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode

Auto shut-off

After 5 minutes of non-use

Operating temperature

10 degree Celsius to +50 degree Celsius; +14 degree Fahrenheit to +122 degree Fahrenheit

Specification to -20 degree Celsius/-4 degree Fahrenheit on request

Size

5.86in×2.87in×1.25in; 149mm×73mm×32mm (H×W×D)

Weight

200g; 7oz (including batteries)

Data logger capacity

Up to 500 readings can be divided into a maximum of 5 files (user-selectable)

Optional accessories

Attachable rubber case

Numerous special probes on request

Couplants and high-temperature couplant

4-step/6-step block for calibration

Data transmission cable

Application software

Operating language

English and Chinese

Measuring error Up to 1in: ±0.002in or ±0.1mm

Above 1in: ± 1%H

H is the height of the testing object

Repeatability

±0.001in or ±0.1mm

Application software

UMVIEW

Interfaces

Serial RS 232C port in combination with a communicative cable

Data transfer parameters: 8 bits, 1 stop bit, 9600 baud, no parity.

Main Products: Portable Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge, Penetrating Coating Ultrasonic Thickness Gauge, Portable Hardness Tester, Pen-Type Hardness Tester, Digital Shore Durometer, Shore Durometer.

Key Words: NDT Instrument, Testing Instrument, Testing Equipment, Test Equipment, Testing Tools.

Please contact with us for more related productions!