PTFE Micro Powder CPH100

PTFE Micro Powder CPH100 If any enquiry for this product, please contact us via mail Fluoroadditive CPH100 is a white PTFE powder specialized for use as an additive to impart low surface energy and other fluoropolymer attributes. CPH100 is well suited for add in inks and coatings where a narrow particle size distribution is desired.

It could improve lubricity and wear resistance when with plastics and rubbers. Added to lubricants, it can enhance performance under severe conditions.CPH100 can be used at temperature from -190℃ to 250℃(-310℉ to 480℉). CPH100 is generally designed to used as an additive, although it can also be used alone as a dry lubricants.

It is unsuitable to be used as a molding or extrusion resin to replace for any of the high molecular weight PTFE resin. CPH100 is inert to all chemicals and solvent. It is a good electrical insulator, does not absorb water, and is highly resistant to weathering.

Application CPH100 is used as an additive in printing inks to improve certain properties, such as rub resistance, slip, surface smoothness and gloss. It can also reduce the "blocking". Typically,CPH100 is used in combination with polyethylene waxes to get the property modification.

Due to its small particle size and narrow particle size distribution, CPH100 can be use in a variety of coating system to improve nonstick, antifriction, corrosion inhibition properties. It can also reduce the friction coefficient and increase the rub resistance.

Plastics and elastomers containing CPH100 have shown improved lubricity and reduced friction and wear. Typical loadings of 5-20% by weight were used. Specification Property

Test Method

Unit

Specification

Typical Value

Average Bulk Density

ASTM D4895

g/l

225-600

300

Melting Peak Temperature

ASTM D4894

℃

325±5

325±5

Average Particle Size

ASTM D4464

μm

5-20

D10