Name: Magnetic Blender
Brand: Hichine
SKU: HSMB20

Description

Magnetic mixing is a fully enclosed, no leakage, and corrosion-resistant mixing method. Due to its non-contact torque transmission, the static sealing to replace dynamic sealing completely solves the leaking problem of mechanical sealing. The equipment is mainly applied to Pharmaceutical, Food machinery heating, resolving the material

Working principles

1. A vortex produced by the mixing impeller sucks the soluble powder or liquid towards the impeller

2. After reaching the impeller, the fluid flows in a radical direction rush to the tank wall due to the centrifugal force

3. After reaching the tank wall, the fluid travels upwards and then circulates down to the suction end of impeller

4. The overall bulk movement and the mixing action around the mixer ensure that a homogeneous, mixing, dissolving, dispersing blend is achieved

Design and features

1. High blending capacity with low shear

2. Magnetic coupling, no risk of leakage

3. CIP/SIP design

4. Bayonet coupling for easy assembly/disassembly of the drive unit

5. Low power consumption

6. Effective blending even of small volume

7. Very low particle generation

8. Bottom mounted. Excellent for suspensions

9. Frequently converter recommended

Application

1. Bottom entry magnetic agitator, also called magnetic mixer, presents a highly hygienic solution for the applications of dispersion, dissolution, homogenization and mixing of a wide range of media in the pharmaceutical industry

2. The magnetic agitators are especially useful in sterile process; absence of mechanical seals prevents any contact with the exterior environment

3. The most common applications are dissolution of glucose in dematerialized water, maintenance of vaccine suspensions homogeneity and agitation of blood fractions, also for pharmaceutical such vaccine mixing

Materials

Rotor AISI 316L or 304

Welding plate AISI 316L

Bearing SIC

Surface finish Ra< 0.5

Options Bearing: SiC.

Parts in contact with the media

special materials

Electropolished.

Speed sensor.

Control panel. With warm speed reducer: Fixed speed range from 50-186rpm (according to different process)

Wish gear speed reducer: Fixed speed range from 150-600rpm (according to different process)

With 6-pole motor: Fixed speed at 960 rpm, which can be equipped with frequency converter, to control the speed.

Selection table

Model Torque power

150rpm 70rpm 35rpm

HSMB20 20N.M 0.37 0.25 0.18

HSMB40 40N.M 0.75(0.55) 0.37(0.55) 0.25(0.37)

HSMB80 80N.M 1.1 0.75 0.37(0.55)

HSMB120 120N.M 1.5 1.1 0.55(0.75)

HSMB150 150N.M 2.2 1.5 0.75(1.1)

HSMB200 200N.M 3 2.2 1.1(1.5)

HSMB300 300N.M 4 3 1.5(2.2)

HSMB500 500N.M 7.5 (5.5) 5.5(4) 4(3.0)

HSMB800 800N.M 11 7.5 5.5(4)

HSMB1000 1000N.M 15 11 7.5(5.5)

Note: 1, a few general parameters noted above, pursuant to the request of the customer, mixing form and concentration and viscosity of the medium, temperature, pressure and change.

.Installation dimensions

Model Capacity (L) Matched power ( w)

#8804;120rpm ≤230rpm ≤350rpm ≤450rpm ≤620rpm ≤960rpm

AMB5/67 10-200 60 60 90 120 180 250

BMB5/67

AMB5/78 10-300 60 90 120 180 250 370

AMB10/108 50-800 90 120 180 250 370 550

BMB10/108

AMB10/114 100-1200 120 180 250 370 550 750

AMB20/130 200-2500 180 250 370 550 750 1100

BMB20/130

AMB20/145 200-3000 250 370 550 750 1100 1500