MDF plywood

MDF: Surface: best sanding or pressing melamine paper: matt, glossy, texture, bump Formaldehyde Emission: E0, E1, E2 Density: 720~860kgs/cbm Melamine paper: solid color(white, red, blue, green etc. ) - wooden grain color( cherry, oak, ash, walnut, maple, birch etc. ) Melamine paper grammer: 70~120g/m2 Internal bond: ≥ 0.55 Mpa Modulus of elasticity:≥ 2200Mpa Screw holdingFace: ≥ 1000N, Edge: ≥ 800N Moisture contents:4-13% Bending strength:≥ 20Mpa Water absorption:≤ 10% Surface bond strength: ≥ 1.2Mpa Formaldehyde emission: E0≤ 3 mg/100g,E1≤9mg/100g, E2≤ 30mg/100g

MDF is the man-made sheet, using the qualified logs as raw material, cooked to soften and smash, and pressed with urea-formaldehyde resin and other adhesive.

The character of MDF is of good physical properties and processing performance, low cost, high utilization and simple processing, being suitable to furniture manufacturing, architectural decoration, sports, wall panels on the ground, partitioned etc.

Packaging: wrapped with plastic bag inside, covered with mdf outside to protect from born, then tied with steel tape, at last a pallet on the bottom of each bundle to protect from broken.