Lift Control Card (Turkey)

Arl-200 is a CE certified lift control card. Here are the features: - all system parameters can be adjusted by using buttons and graphic LCD placed on the card, -can be used at any command type up to 32 floors, - can be used at one speed, two speed, speed controlled and hydraulic lifts without any extra parts.

System can be selected from the menu, - can be used in group operation, - all panels in the group are same and no extra panel is needed. Only thing to do is to set each panel as a, b and c in the program menu, - communication with car and floor panels is achieved via 2 cables.

Fast and faultless wiring and reduction in cable cost are supplied by connected cabling, - reads the shaft data from magnetic counter system or encoder. When an encoder is used, braking and stopping adjustment can be made by using the buttons on the card or the buttons on the car panel.

Can be used in high speed elevators, - saving errors on system with date and time information enables to track past errors in detail, - automatic door control according to the stops is achieved by double automatic door support, - rs-232, rs-485 and 2 can bus serial ports, - monitoring the lift status, giving commands, making adjustments and following errors are possible by a connection to a local computer via rs-232 or to a remote computer using a modem, - 5 free inputs,5 free transistorized outputs and 8 free relay outputs can be programmed and used for special purposes, - no need for an external phase protection relay.

Complete protection is provided by phase order, phase failure and motor thermistor control placed on the card. These protections can be deactivated or activated via menu, - designed according to European lift standard en-81.